This page last changed on Jun 30, 2014 by reesecj.

What is everyone using now that z-cloud is down? I bought a step by step book on Amazon and now I'm lost because I can't test to see if my devices are working or what nodes they are on. I'm using OR w/ Z-stick v2 and I'm trying to connect to a Schlage door/window sensor to get started. I've been at this for hours and nothing is working. I've read and reread every post and set of instructions I can find and everything should be installed correctly but still nothing. Here are my logs, ANY help or advice to send me in the right direction would really appreciated!

boot.log
INFO 2014-06-29 19:18:06,933 :

--------------------------------------------------------------------

DEPLOYING NEW CONTROLLER RUNTIME...

--------------------------------------------------------------------

INFO 2014-06-29 19:18:17,071 : No rule definitions found in 'C:\Users\Reese\shProject\ORC\webapps\controller\rules'.
INFO 2014-06-29 19:18:17,072 : Initialized event processor : Drools Rule Engine
INFO 2014-06-29 19:18:17,148 : Initialized event processor : RRD4J Data Logger
INFO 2014-06-29 19:18:17,148 : Initialized event processor : EmonCMS Data Logger
ERROR 2014-06-29 19:18:17,169 : Creating sensor failed. Error : The node '2' is not known by the Z-Wave controller
XML Element : <sensor xmlns="http://www.openremote.org" id="39" name="Power ON/OFF" type="switch">
<include type="command" ref="36" />
<state name="on" />
<state name="off" />
</sensor>
org.openremote.controller.exception.NoSuchCommandException: The node '2' is not known by the Z-Wave controller
at org.openremote.controller.protocol.zwave.ZWaveCommandBuilder.build(ZWaveCommandBuilder.java:108)
at org.openremote.controller.command.CommandFactory.getCommand(CommandFactory.java:164)
at org.openremote.controller.model.xml.Version20SensorBuilder.parseSensorEventProducer(Version20SensorBuilder.java:420)
at org.openremote.controller.model.xml.Version20SensorBuilder.build(Version20SensorBuilder.java:287)
at org.openremote.controller.deployer.Version20ModelBuilder.buildSensorObjectModelFromXML(Version20ModelBuilder.java:817)
at org.openremote.controller.deployer.Version20ModelBuilder.buildSensorModel(Version20ModelBuilder.java:663)
at org.openremote.controller.deployer.Version20ModelBuilder.build(Version20ModelBuilder.java:557)
at org.openremote.controller.deployer.AbstractModelBuilder.buildModel(AbstractModelBuilder.java:154)
at org.openremote.controller.service.Deployer.startup(Deployer.java:858)
at org.openremote.controller.service.Deployer.startController(Deployer.java:336)
at org.openremote.controller.spring.SpringContext.initializeController(SpringContext.java:109)
at org.openremote.controller.service.ServiceContext.init(ServiceContext.java:383)
at org.openremote.controller.bootstrap.Startup.loadServiceContext(Startup.java:85)
at org.openremote.controller.bootstrap.servlet.ServletStartup.initializeServiceContext(ServletStartup.java:190)
at org.openremote.controller.bootstrap.servlet.ServletStartup.contextInitialized(ServletStartup.java:109)
at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:3843)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4342)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:791)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:771)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:525)
at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:926)
at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:889)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:492)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1149)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:311)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:117)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1053)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:719)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
at org.apache.catalina.core.StandardService.start(StandardService.java:516)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
at org.apache.catalina.startup.Catalina.start(Catalina.java:578)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:483)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:413)
INFO 2014-06-29 19:18:17,236 : Startup complete.
INFO 2014-06-29 19:18:17,236 : Controller Definition File Watcher for Default Deployer started.
INFO 2014-06-29 19:18:25,237 :

--------------------------------------------------------------------

UNDEPLOYING CURRENT CONTROLLER RUNTIME...

--------------------------------------------------------------------

INFO 2014-06-29 19:18:25,238 : Stopped event processor : Drools Rule Engine
INFO 2014-06-29 19:18:25,239 : Stopped event processor : RRD4J Data Logger
INFO 2014-06-29 19:18:25,240 : Stopped event processor : EmonCMS Data Logger
INFO 2014-06-29 19:18:25,240 : Shutdown complete.
INFO 2014-06-29 19:18:25,241 :

--------------------------------------------------------------------

DEPLOYING NEW CONTROLLER RUNTIME...

--------------------------------------------------------------------

INFO 2014-06-29 19:18:25,253 : No rule definitions found in 'C:\Users\Reese\shProject\ORC\webapps\controller\rules'.
INFO 2014-06-29 19:18:25,253 : Initialized event processor : Drools Rule Engine
INFO 2014-06-29 19:18:25,259 : Initialized event processor : RRD4J Data Logger
INFO 2014-06-29 19:18:25,260 : Initialized event processor : EmonCMS Data Logger
ERROR 2014-06-29 19:18:25,262 : Creating sensor failed. Error : The node '2' is not known by the Z-Wave controller
XML Element : <sensor xmlns="http://www.openremote.org" id="39" name="Power ON/OFF" type="switch">
<include type="command" ref="36" />
<state name="on" />
<state name="off" />
</sensor>
org.openremote.controller.exception.NoSuchCommandException: The node '2' is not known by the Z-Wave controller
at org.openremote.controller.protocol.zwave.ZWaveCommandBuilder.build(ZWaveCommandBuilder.java:108)
at org.openremote.controller.command.CommandFactory.getCommand(CommandFactory.java:164)
at org.openremote.controller.model.xml.Version20SensorBuilder.parseSensorEventProducer(Version20SensorBuilder.java:420)
at org.openremote.controller.model.xml.Version20SensorBuilder.build(Version20SensorBuilder.java:287)
at org.openremote.controller.deployer.Version20ModelBuilder.buildSensorObjectModelFromXML(Version20ModelBuilder.java:817)
at org.openremote.controller.deployer.Version20ModelBuilder.buildSensorModel(Version20ModelBuilder.java:663)
at org.openremote.controller.deployer.Version20ModelBuilder.build(Version20ModelBuilder.java:557)
at org.openremote.controller.deployer.AbstractModelBuilder.buildModel(AbstractModelBuilder.java:154)
at org.openremote.controller.service.Deployer.startup(Deployer.java:858)
at org.openremote.controller.service.Deployer.softRestart(Deployer.java:440)
at org.openremote.controller.service.Deployer$ControllerDefinitionWatch.run(Deployer.java:1324)
at java.lang.Thread.run(Thread.java:745)
INFO 2014-06-29 19:18:25,285 : Startup complete.
INFO 2014-06-29 19:18:45,286 :

--------------------------------------------------------------------

UNDEPLOYING CURRENT CONTROLLER RUNTIME...

--------------------------------------------------------------------

INFO 2014-06-29 19:18:45,287 : Stopped event processor : Drools Rule Engine
INFO 2014-06-29 19:18:45,288 : Stopped event processor : RRD4J Data Logger
INFO 2014-06-29 19:18:45,288 : Stopped event processor : EmonCMS Data Logger
INFO 2014-06-29 19:18:45,288 : Shutdown complete.
INFO 2014-06-29 19:18:45,289 :

--------------------------------------------------------------------

DEPLOYING NEW CONTROLLER RUNTIME...

--------------------------------------------------------------------

INFO 2014-06-29 19:18:45,299 : No rule definitions found in 'C:\Users\Reese\shProject\ORC\webapps\controller\rules'.
INFO 2014-06-29 19:18:45,300 : Initialized event processor : Drools Rule Engine
INFO 2014-06-29 19:18:45,306 : Initialized event processor : RRD4J Data Logger
INFO 2014-06-29 19:18:45,307 : Initialized event processor : EmonCMS Data Logger
ERROR 2014-06-29 19:18:45,309 : Creating sensor failed. Error : The node '2' is not known by the Z-Wave controller
XML Element : <sensor xmlns="http://www.openremote.org" id="39" name="Power ON/OFF" type="switch">
<include type="command" ref="36" />
<state name="on" />
<state name="off" />
</sensor>
org.openremote.controller.exception.NoSuchCommandException: The node '2' is not known by the Z-Wave controller
at org.openremote.controller.protocol.zwave.ZWaveCommandBuilder.build(ZWaveCommandBuilder.java:108)
at org.openremote.controller.command.CommandFactory.getCommand(CommandFactory.java:164)
at org.openremote.controller.model.xml.Version20SensorBuilder.parseSensorEventProducer(Version20SensorBuilder.java:420)
at org.openremote.controller.model.xml.Version20SensorBuilder.build(Version20SensorBuilder.java:287)
at org.openremote.controller.deployer.Version20ModelBuilder.buildSensorObjectModelFromXML(Version20ModelBuilder.java:817)
at org.openremote.controller.deployer.Version20ModelBuilder.buildSensorModel(Version20ModelBuilder.java:663)
at org.openremote.controller.deployer.Version20ModelBuilder.build(Version20ModelBuilder.java:557)
at org.openremote.controller.deployer.AbstractModelBuilder.buildModel(AbstractModelBuilder.java:154)
at org.openremote.controller.service.Deployer.startup(Deployer.java:858)
at org.openremote.controller.service.Deployer.softRestart(Deployer.java:440)
at org.openremote.controller.service.Deployer$ControllerDefinitionWatch.run(Deployer.java:1324)
at java.lang.Thread.run(Thread.java:745)
INFO 2014-06-29 19:18:45,333 : Startup complete.

Z-wave-debug.log
DEBUG 2014-06-29 19:06:24,597 (Z-Wave): Building Z-Wave command
DEBUG 2014-06-29 19:06:24,597 (Z-Wave): Z-Wave command: nodeId = 1
DEBUG 2014-06-29 19:06:24,597 (Z-Wave): Z-Wave command: command = status
DEBUG 2014-06-29 19:08:30,771 (Z-Wave): Building Z-Wave command
DEBUG 2014-06-29 19:08:30,771 (Z-Wave): Z-Wave command: nodeId = 2
DEBUG 2014-06-29 19:08:30,771 (Z-Wave): Z-Wave command: command = status
DEBUG 2014-06-29 19:09:13,306 (Z-Wave): Building Z-Wave command
DEBUG 2014-06-29 19:09:13,306 (Z-Wave): Z-Wave command: nodeId = 2
DEBUG 2014-06-29 19:09:13,306 (Z-Wave): Z-Wave command: command = status
DEBUG 2014-06-29 19:18:17,160 (Z-Wave): Building Z-Wave command
DEBUG 2014-06-29 19:18:17,160 (Z-Wave): Z-Wave command: nodeId = 2
DEBUG 2014-06-29 19:18:17,160 (Z-Wave): Z-Wave command: command = status
DEBUG 2014-06-29 19:18:25,261 (Z-Wave): Building Z-Wave command
DEBUG 2014-06-29 19:18:25,261 (Z-Wave): Z-Wave command: nodeId = 2
DEBUG 2014-06-29 19:18:25,261 (Z-Wave): Z-Wave command: command = status
DEBUG 2014-06-29 19:18:45,309 (Z-Wave): Building Z-Wave command
DEBUG 2014-06-29 19:18:45,309 (Z-Wave): Z-Wave command: nodeId = 2
DEBUG 2014-06-29 19:18:45,309 (Z-Wave): Z-Wave command: command = status
DEBUG 2014-06-29 19:21:43,370 (Z-Wave): Building Z-Wave command
DEBUG 2014-06-29 19:21:43,370 (Z-Wave): Z-Wave command: nodeId = 2
DEBUG 2014-06-29 19:21:43,370 (Z-Wave): Z-Wave command: command = status
DEBUG 2014-06-29 19:21:53,411 (Z-Wave): Building Z-Wave command
DEBUG 2014-06-29 19:21:53,411 (Z-Wave): Z-Wave command: nodeId = 2
DEBUG 2014-06-29 19:21:53,411 (Z-Wave): Z-Wave command: command = status

I've seen that people use openzwave-control-panel to configure the Z-Wave network.

Posted by rhitz at Jun 30, 2014 07:52
Document generated by Confluence on Jun 05, 2016 09:34