This page last changed on Sep 16, 2014 by schaaf75.

Hello,
I have the following components from Eltako at home working:
FAM14: Processor
FUD14: EEP: F6-02-01 commands ON / OFF AND EEP: A5-38-08 commands STATUS_ELTAKO / DIM_ELTAKO
FMS14: EEP: F6-02-01 commands ON / OFF

Now I have 2 new modules
FABH63: motion/brightness sensors
I found in the documentation that EEP:A5-08-01

Is this module (EEP) already implemented?
If yes, which commands does this module use in code?

An other question is there an format for writing a manual (for the community)?
Doc? pdf? Template?

Kind regards

Hi,

yes, this EEP is already implemented. Commands are:

 *     +-------------------------------------------------------------------------------------------------+
 *     |Offset|Size|  Bitrange  |    Data      |ShortCut|   Description      |Valid Range| Scale    |Unit|
 *     +-------------------------------------------------------------------------------------------------+
 *     |0     |8   |DB3.7..DB3.0|Supply Voltage|  SVC   |Supply Voltage      |   0..255  | 0..5.1   |V   |
 *     +-------------------------------------------------------------------------------------------------+
 *     |8     |8   |DB2.7..DB2.0|Illumination  |  ILL   |Illumination(linear)|   0..255  | 0..510   |lx  |
 *     +-------------------------------------------------------------------------------------------------+
 *     |16    |8   |DB1.7..DB1.0|Temperature   |  TMP   |Temperature(linear) |   0..255  | 0..+51   |°C  |
 *     +-------------------------------------------------------------------------------------------------+
 *     |24    |4   |DB0.7..DB0.4|Not Used                                                                |
 *     +-------------------------------------------------------------------------------------------------+
 *     |28    |1   |DB0.3       |Learn Bit     |  LRNB  |Learn bit           |Enum:                      |
 *     |      |    |            |              |        |                    +---------------------------+
 *     |      |    |            |              |        |                    |0: Teach-in telegram       |
 *     |      |    |            |              |        |                    +---------------------------+
 *     |      |    |            |              |        |                    |1: Data telegram           |
 *     +-------------------------------------------------------------------------------------------------+
 *     |29    |1   |DB0.2       |Not Used                                                                |
 *     +-------------------------------------------------------------------------------------------------+
 *     |30    |1   |DB0.1       |PIR Status    |  PIRS  |PIR Status          |Enum:                      |
 *     |      |    |            |              |        |                    +---------------------------+
 *     |      |    |            |              |        |                    |0: PIR on                  |
 *     |      |    |            |              |        |                    +---------------------------+
 *     |      |    |            |              |        |                    |1: PIR off                 |
 *     +-------------------------------------------------------------------------------------------------+
 *     |31    |1   |DB0.0       |Occupancy     |  OCC   |                    |Enum:                      |
 *     |      |    |            |              |        |                    +---------------------------+
 *     |      |    |            |              |        |                    |0: Button pressed          |
 *     |      |    |            |              |        |                    +---------------------------+
 *     |      |    |            |              |        |                    |1: Button released         |
 *     +-------------------------------------------------------------------------------------------------+
Posted by aktur at Sep 16, 2014 12:24

Thank Michal for the quick reply.
Where can I find (directory)this file/code?

Posted by schaaf75 at Sep 16, 2014 13:26

This snippet is from the header of ./src/org/openremote/controller/protocol/enocean/profile/EepA50801.java

Posted by aktur at Sep 16, 2014 14:43

Hi,

If you would like to write a manual, just create a new page and use the format as used on the 'How to....' pages in the 'get started' section. If you are ready and happy with it, we can add it to the official documentation. We would appreciate contributions on documentation.

Posted by pierre kil at Sep 17, 2014 07:43
Document generated by Confluence on Jun 05, 2016 09:35