This page last changed on Feb 20, 2016 by gsmalarmchina.

GSM alarm system with LCD display and Voice prompt
GSM alarm system with LCD display and Voice prompt
GSM alarm system with LCD display and Voice prompt
Name:GSM alarm system with LCD display and Voice prompt
led display
Memo:
products introduction

rgb led display

  Features:

  1. 7 wired and 99 wireless defense zones

  2. LCD display with time clock

  3. 3 groups of timely arm and disarm

  4. Call 6 phones and send SMS to 3 numbers

  5. 10 seconds automatic Voice message recording

  6. Voice prompt for main panel operation (English/French/Spanish/Italian optional)

  7. Built-in intelligent English message

  8. Alarm system can be used as a telephone

  9. Arm, disarm, monitor and intercom by phone

  10. Real-time, delay, 24 hours, bypass zones program

  11. All the settings can be finished by keypad

  Technical parameters

  Input Voltage: DC12V/1A

  Standby Current:<55mA

  Alarming Current: <450mA

  Wireless Frequency:433MHz, 2262/4.7MΩ

  GSM Frequency: 850/900/ 1800/ 1900MHz

  Back-up Battery: NI-HI AAA*6 DC7.2V

  Siren Volume: 110dB

What power is required for the GSM module?
Using which MCU unit i can establish this system?
Also the GPRS module needs any special type of coding? I mean any special initializing commands?

Impedance Controlled PCBs

Posted by giustokaul at Feb 25, 2016 10:14
Document generated by Confluence on Jun 05, 2016 09:30