This page last changed on Dec 28, 2013 by hy8r1d.

Hi all,

I am trying to create a switch/Slider with a HDL M/D06.1 Dimmer details here: http://www.hdlchina.com/Products_details.asp?cpid=259

It appears the unit can only have the option of 1 status, either 1bit or 1byte per channel.

I have tried some combinations to have the switch/slider working together with no luck.

Is there a workaround i could possibly try or do i need to have both status to function?

Help is much appreciated

Kind Regards,

Luke

For the switch you need the 1bit and for slider the 1byte.
If your device only supports one or the other (which is really unsual) you will have to simulate the other through a virtual command and rules.

Posted by mredeker at Dec 29, 2013 10:35

Hi Marcus,

Thank you for the feedback.

I ended up using absolute dimming which is 1byte for the slider and it is working.

Cheers.

Posted by hy8r1d at Jan 03, 2014 10:57
Document generated by Confluence on Jun 05, 2016 09:36