This page last changed on Jun 20, 2014 by ggraja.

Juha,
I finally got around to setting up OpenRemote with FreeNas. KNX does'nt work whereas IR commands work. The IR commands are routed through IP to IR device (Global Cache GC-100).

Everything works fine when I controller is running on Win7 PC. I have set up config.properties the exact same way on FreeNas too.

On all previous occasions I was just checking controller sync and panel refresh on the phone and I presumed all will work fine.

DEBUG 2014-06-20 10:31:34,578 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/18 Data: 0x00
INFO 2014-06-20 10:31:34,578 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:34,579 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/17 Data: 0x00
DEBUG 2014-06-20 10:31:34,579 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/19 Data: 0x00
INFO 2014-06-20 10:31:34,579 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:34,579 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:34,581 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/1 Data: 0x00
DEBUG 2014-06-20 10:31:34,581 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/4 Data: 0x00
DEBUG 2014-06-20 10:31:34,581 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/0 Data: 0x00
INFO 2014-06-20 10:31:34,581 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:34,581 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:34,581 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:34,582 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/4 Data: 0x00
DEBUG 2014-06-20 10:31:34,582 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/2 Data: 0x00
DEBUG 2014-06-20 10:31:34,582 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/5 Data: 0x00
DEBUG 2014-06-20 10:31:34,582 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/6 Data: 0x00
DEBUG 2014-06-20 10:31:34,582 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/5 Data: 0x00
INFO 2014-06-20 10:31:34,582 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:34,582 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:34,582 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:34,582 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:34,582 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:34,584 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/6 Data: 0x00
DEBUG 2014-06-20 10:31:34,584 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/3 Data: 0x00
INFO 2014-06-20 10:31:34,584 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:34,584 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:35,079 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/18 Data: 0x00
INFO 2014-06-20 10:31:35,079 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:35,080 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/19 Data: 0x00
DEBUG 2014-06-20 10:31:35,080 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/17 Data: 0x00
INFO 2014-06-20 10:31:35,080 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:35,080 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:35,082 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/0 Data: 0x00
DEBUG 2014-06-20 10:31:35,082 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/4 Data: 0x00
DEBUG 2014-06-20 10:31:35,082 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/1 Data: 0x00
INFO 2014-06-20 10:31:35,082 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:35,082 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:35,082 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:35,083 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/2 Data: 0x00
DEBUG 2014-06-20 10:31:35,083 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/5 Data: 0x00
DEBUG 2014-06-20 10:31:35,083 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/5 Data: 0x00
DEBUG 2014-06-20 10:31:35,083 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/4 Data: 0x00
DEBUG 2014-06-20 10:31:35,083 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/6 Data: 0x00
INFO 2014-06-20 10:31:35,083 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:35,083 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:35,083 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:35,083 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:35,083 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:35,085 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/3 Data: 0x00
DEBUG 2014-06-20 10:31:35,085 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/6 Data: 0x00
INFO 2014-06-20 10:31:35,085 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:35,085 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:35,580 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/18 Data: 0x00
INFO 2014-06-20 10:31:35,580 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:35,581 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/17 Data: 0x00
DEBUG 2014-06-20 10:31:35,581 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/19 Data: 0x00
INFO 2014-06-20 10:31:35,581 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:35,581 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:35,583 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/0 Data: 0x00
DEBUG 2014-06-20 10:31:35,583 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/4 Data: 0x00
DEBUG 2014-06-20 10:31:35,583 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/1 Data: 0x00
INFO 2014-06-20 10:31:35,583 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:35,583 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:35,583 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:35,584 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/4 Data: 0x00
DEBUG 2014-06-20 10:31:35,584 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/6 Data: 0x00
DEBUG 2014-06-20 10:31:35,584 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/5 Data: 0x00
DEBUG 2014-06-20 10:31:35,584 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/5 Data: 0x00
DEBUG 2014-06-20 10:31:35,584 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/2 Data: 0x00
INFO 2014-06-20 10:31:35,584 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:35,584 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:35,584 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:35,584 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:35,584 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:35,586 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/3 Data: 0x00
DEBUG 2014-06-20 10:31:35,586 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/6 Data: 0x00
INFO 2014-06-20 10:31:35,586 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:35,586 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:36,081 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/18 Data: 0x00
INFO 2014-06-20 10:31:36,081 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:36,082 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/19 Data: 0x00
DEBUG 2014-06-20 10:31:36,082 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/17 Data: 0x00
INFO 2014-06-20 10:31:36,082 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:36,082 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:36,084 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/0 Data: 0x00
DEBUG 2014-06-20 10:31:36,084 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/4 Data: 0x00
DEBUG 2014-06-20 10:31:36,084 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/1 Data: 0x00
INFO 2014-06-20 10:31:36,084 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:36,084 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:36,084 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:36,085 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/6 Data: 0x00
DEBUG 2014-06-20 10:31:36,085 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/5 Data: 0x00
DEBUG 2014-06-20 10:31:36,085 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/5 Data: 0x00
DEBUG 2014-06-20 10:31:36,085 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/4 Data: 0x00
DEBUG 2014-06-20 10:31:36,085 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/2 Data: 0x00
INFO 2014-06-20 10:31:36,085 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:36,085 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:36,085 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:36,085 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:36,085 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:36,087 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/6 Data: 0x00
DEBUG 2014-06-20 10:31:36,087 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/3 Data: 0x00
INFO 2014-06-20 10:31:36,087 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:36,087 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:36,582 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/18 Data: 0x00
INFO 2014-06-20 10:31:36,582 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:36,583 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/19 Data: 0x00
DEBUG 2014-06-20 10:31:36,583 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/17 Data: 0x00
INFO 2014-06-20 10:31:36,583 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:36,583 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:36,585 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/4 Data: 0x00
DEBUG 2014-06-20 10:31:36,585 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/1 Data: 0x00
DEBUG 2014-06-20 10:31:36,585 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/0 Data: 0x00
INFO 2014-06-20 10:31:36,585 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:36,585 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:36,585 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:36,586 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/4 Data: 0x00
DEBUG 2014-06-20 10:31:36,586 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/6 Data: 0x00
DEBUG 2014-06-20 10:31:36,586 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/5 Data: 0x00
DEBUG 2014-06-20 10:31:36,586 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/2 Data: 0x00
DEBUG 2014-06-20 10:31:36,586 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/5 Data: 0x00
INFO 2014-06-20 10:31:36,586 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:36,586 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:36,586 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:36,586 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:36,586 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:36,588 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/6 Data: 0x00
DEBUG 2014-06-20 10:31:36,588 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/3 Data: 0x00
INFO 2014-06-20 10:31:36,588 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:36,588 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:37,083 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/18 Data: 0x00
INFO 2014-06-20 10:31:37,083 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:37,084 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/19 Data: 0x00
DEBUG 2014-06-20 10:31:37,084 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/17 Data: 0x00
INFO 2014-06-20 10:31:37,084 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:37,084 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:37,086 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/4 Data: 0x00
DEBUG 2014-06-20 10:31:37,086 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/1 Data: 0x00
DEBUG 2014-06-20 10:31:37,086 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/0 Data: 0x00
INFO 2014-06-20 10:31:37,086 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:37,086 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:37,086 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:37,087 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/5 Data: 0x00
DEBUG 2014-06-20 10:31:37,087 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/5 Data: 0x00
DEBUG 2014-06-20 10:31:37,087 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/2 Data: 0x00
DEBUG 2014-06-20 10:31:37,087 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/6 Data: 0x00
DEBUG 2014-06-20 10:31:37,087 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/4 Data: 0x00
INFO 2014-06-20 10:31:37,087 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:37,087 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:37,087 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:37,087 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:37,087 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:37,089 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/6 Data: 0x00
DEBUG 2014-06-20 10:31:37,089 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/3 Data: 0x00
INFO 2014-06-20 10:31:37,089 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:37,089 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:37,584 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/18 Data: 0x00
INFO 2014-06-20 10:31:37,584 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:37,585 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/17 Data: 0x00
DEBUG 2014-06-20 10:31:37,585 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/19 Data: 0x00
INFO 2014-06-20 10:31:37,585 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:37,585 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:37,587 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/1 Data: 0x00
DEBUG 2014-06-20 10:31:37,587 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/4 Data: 0x00
DEBUG 2014-06-20 10:31:37,587 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/0 Data: 0x00
INFO 2014-06-20 10:31:37,587 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:37,587 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:37,587 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:37,588 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/5 Data: 0x00
DEBUG 2014-06-20 10:31:37,588 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/2 Data: 0x00
DEBUG 2014-06-20 10:31:37,588 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/6 Data: 0x00
DEBUG 2014-06-20 10:31:37,588 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/4 Data: 0x00
DEBUG 2014-06-20 10:31:37,588 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/5 Data: 0x00
INFO 2014-06-20 10:31:37,588 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:37,588 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:37,588 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:37,588 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:37,588 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:37,590 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/6 Data: 0x00
DEBUG 2014-06-20 10:31:37,590 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/3 Data: 0x00
INFO 2014-06-20 10:31:37,590 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:37,590 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:38,085 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/18 Data: 0x00
INFO 2014-06-20 10:31:38,085 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:38,086 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/19 Data: 0x00
DEBUG 2014-06-20 10:31:38,086 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/17 Data: 0x00
INFO 2014-06-20 10:31:38,086 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:38,086 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:38,088 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/0 Data: 0x00
DEBUG 2014-06-20 10:31:38,088 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/4 Data: 0x00
DEBUG 2014-06-20 10:31:38,088 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/1 Data: 0x00
INFO 2014-06-20 10:31:38,088 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:38,088 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:38,088 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:38,089 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/4 Data: 0x00
DEBUG 2014-06-20 10:31:38,089 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/5 Data: 0x00
DEBUG 2014-06-20 10:31:38,089 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/6 Data: 0x00
DEBUG 2014-06-20 10:31:38,089 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/5 Data: 0x00
DEBUG 2014-06-20 10:31:38,089 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/2 Data: 0x00
INFO 2014-06-20 10:31:38,089 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:38,089 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:38,089 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:38,089 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:38,089 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:38,091 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/6 Data: 0x00
DEBUG 2014-06-20 10:31:38,091 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/3 Data: 0x00
INFO 2014-06-20 10:31:38,091 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:38,091 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:38,586 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/18 Data: 0x00
INFO 2014-06-20 10:31:38,586 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:38,587 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/17 Data: 0x00
DEBUG 2014-06-20 10:31:38,587 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/19 Data: 0x00
INFO 2014-06-20 10:31:38,587 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:38,587 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:38,589 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/0 Data: 0x00
DEBUG 2014-06-20 10:31:38,589 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/1 Data: 0x00
DEBUG 2014-06-20 10:31:38,589 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/4 Data: 0x00
INFO 2014-06-20 10:31:38,589 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:38,589 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:38,589 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:38,590 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/5 Data: 0x00
DEBUG 2014-06-20 10:31:38,590 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/2 Data: 0x00
DEBUG 2014-06-20 10:31:38,590 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/5 Data: 0x00
DEBUG 2014-06-20 10:31:38,590 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/6 Data: 0x00
DEBUG 2014-06-20 10:31:38,590 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/4 Data: 0x00
INFO 2014-06-20 10:31:38,590 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:38,590 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:38,590 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:38,590 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:38,590 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:38,592 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/3 Data: 0x00
DEBUG 2014-06-20 10:31:38,592 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/6 Data: 0x00
INFO 2014-06-20 10:31:38,592 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:38,592 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:39,087 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/18 Data: 0x00
INFO 2014-06-20 10:31:39,087 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:39,088 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/17 Data: 0x00
DEBUG 2014-06-20 10:31:39,088 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/19 Data: 0x00
INFO 2014-06-20 10:31:39,088 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:39,088 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:39,090 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/1 Data: 0x00
DEBUG 2014-06-20 10:31:39,090 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/4 Data: 0x00
DEBUG 2014-06-20 10:31:39,090 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/0 Data: 0x00
INFO 2014-06-20 10:31:39,090 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:39,090 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:39,090 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:39,091 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/4 Data: 0x00
DEBUG 2014-06-20 10:31:39,091 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/5 Data: 0x00
DEBUG 2014-06-20 10:31:39,091 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/5 Data: 0x00
DEBUG 2014-06-20 10:31:39,091 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/6 Data: 0x00
DEBUG 2014-06-20 10:31:39,091 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/2 Data: 0x00
INFO 2014-06-20 10:31:39,091 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:39,091 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:39,091 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:39,091 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:39,091 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:39,093 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/6 Data: 0x00
DEBUG 2014-06-20 10:31:39,093 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/3 Data: 0x00
INFO 2014-06-20 10:31:39,093 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:39,093 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:39,588 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/18 Data: 0x00
INFO 2014-06-20 10:31:39,588 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:39,589 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/19 Data: 0x00
DEBUG 2014-06-20 10:31:39,589 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/17 Data: 0x00
INFO 2014-06-20 10:31:39,589 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:39,589 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:39,591 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/0 Data: 0x00
DEBUG 2014-06-20 10:31:39,591 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/1 Data: 0x00
DEBUG 2014-06-20 10:31:39,591 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/4 Data: 0x00
INFO 2014-06-20 10:31:39,591 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:39,591 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:39,591 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:39,592 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/4 Data: 0x00
DEBUG 2014-06-20 10:31:39,592 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/5 Data: 0x00
DEBUG 2014-06-20 10:31:39,592 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/6 Data: 0x00
DEBUG 2014-06-20 10:31:39,592 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/5 Data: 0x00
DEBUG 2014-06-20 10:31:39,592 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/2 Data: 0x00
INFO 2014-06-20 10:31:39,592 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:39,592 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:39,592 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:39,592 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:39,592 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:39,594 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/3 Data: 0x00
DEBUG 2014-06-20 10:31:39,594 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/6 Data: 0x00
INFO 2014-06-20 10:31:39,594 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:39,594 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:40,089 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/18 Data: 0x00
INFO 2014-06-20 10:31:40,089 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:40,090 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/19 Data: 0x00
DEBUG 2014-06-20 10:31:40,090 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/17 Data: 0x00
INFO 2014-06-20 10:31:40,090 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:40,090 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:40,092 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/0 Data: 0x00
DEBUG 2014-06-20 10:31:40,092 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/1 Data: 0x00
DEBUG 2014-06-20 10:31:40,092 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/4 Data: 0x00
INFO 2014-06-20 10:31:40,092 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:40,092 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:40,092 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:40,093 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/2 Data: 0x00
DEBUG 2014-06-20 10:31:40,093 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/4 Data: 0x00
DEBUG 2014-06-20 10:31:40,093 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/6 Data: 0x00
DEBUG 2014-06-20 10:31:40,093 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/5 Data: 0x00
DEBUG 2014-06-20 10:31:40,093 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/5 Data: 0x00
INFO 2014-06-20 10:31:40,093 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:40,093 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:40,093 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:40,093 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:40,093 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:40,095 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/3 Data: 0x00
DEBUG 2014-06-20 10:31:40,095 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/6 Data: 0x00
INFO 2014-06-20 10:31:40,095 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:40,095 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:40,590 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/18 Data: 0x00
INFO 2014-06-20 10:31:40,590 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:40,591 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/19 Data: 0x00
DEBUG 2014-06-20 10:31:40,591 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/17 Data: 0x00
INFO 2014-06-20 10:31:40,591 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:40,591 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:40,593 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/4 Data: 0x00
DEBUG 2014-06-20 10:31:40,593 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/0 Data: 0x00
DEBUG 2014-06-20 10:31:40,593 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/1 Data: 0x00
INFO 2014-06-20 10:31:40,593 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:40,593 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:40,593 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:40,594 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/5 Data: 0x00
DEBUG 2014-06-20 10:31:40,594 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/2 Data: 0x00
DEBUG 2014-06-20 10:31:40,594 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/6 Data: 0x00
DEBUG 2014-06-20 10:31:40,594 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/5 Data: 0x00
DEBUG 2014-06-20 10:31:40,594 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/4 Data: 0x00
INFO 2014-06-20 10:31:40,594 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:40,594 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:40,594 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:40,594 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:40,594 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:40,596 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/6 Data: 0x00
DEBUG 2014-06-20 10:31:40,596 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/3 Data: 0x00
INFO 2014-06-20 10:31:40,596 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:40,596 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:41,091 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/18 Data: 0x00
INFO 2014-06-20 10:31:41,091 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:41,092 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/17 Data: 0x00
DEBUG 2014-06-20 10:31:41,092 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/19 Data: 0x00
INFO 2014-06-20 10:31:41,092 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:41,092 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:41,094 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/4 Data: 0x00
DEBUG 2014-06-20 10:31:41,094 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/1 Data: 0x00
DEBUG 2014-06-20 10:31:41,094 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/0 Data: 0x00
INFO 2014-06-20 10:31:41,094 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:41,094 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:41,094 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:41,095 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/4 Data: 0x00
DEBUG 2014-06-20 10:31:41,095 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/5 Data: 0x00
DEBUG 2014-06-20 10:31:41,095 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/5 Data: 0x00
DEBUG 2014-06-20 10:31:41,095 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/6 Data: 0x00
DEBUG 2014-06-20 10:31:41,095 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/2 Data: 0x00
INFO 2014-06-20 10:31:41,095 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:41,095 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:41,095 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:41,095 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:41,095 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:41,097 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/3 Data: 0x00
DEBUG 2014-06-20 10:31:41,097 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/6 Data: 0x00
INFO 2014-06-20 10:31:41,097 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:41,097 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:41,592 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/18 Data: 0x00
INFO 2014-06-20 10:31:41,592 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:41,593 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/17 Data: 0x00
DEBUG 2014-06-20 10:31:41,593 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/19 Data: 0x00
INFO 2014-06-20 10:31:41,593 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:41,593 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:41,595 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/4 Data: 0x00
DEBUG 2014-06-20 10:31:41,595 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/1 Data: 0x00
DEBUG 2014-06-20 10:31:41,595 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/0 Data: 0x00
INFO 2014-06-20 10:31:41,595 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:41,595 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:41,595 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:41,596 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/5 Data: 0x00
DEBUG 2014-06-20 10:31:41,596 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/2 Data: 0x00
DEBUG 2014-06-20 10:31:41,596 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/6 Data: 0x00
DEBUG 2014-06-20 10:31:41,596 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/5 Data: 0x00
DEBUG 2014-06-20 10:31:41,596 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/4 Data: 0x00
INFO 2014-06-20 10:31:41,596 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:41,596 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:41,596 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:41,596 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:41,596 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:41,598 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/6 Data: 0x00
DEBUG 2014-06-20 10:31:41,598 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/3 Data: 0x00
INFO 2014-06-20 10:31:41,598 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:41,598 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:42,093 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/18 Data: 0x00
INFO 2014-06-20 10:31:42,093 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:42,094 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/17 Data: 0x00
DEBUG 2014-06-20 10:31:42,094 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/19 Data: 0x00
INFO 2014-06-20 10:31:42,094 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:42,094 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:42,096 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/4 Data: 0x00
DEBUG 2014-06-20 10:31:42,096 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/1 Data: 0x00
DEBUG 2014-06-20 10:31:42,096 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/0 Data: 0x00
INFO 2014-06-20 10:31:42,096 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:42,096 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:42,096 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:42,097 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/5 Data: 0x00
DEBUG 2014-06-20 10:31:42,097 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/2 Data: 0x00
DEBUG 2014-06-20 10:31:42,097 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/4 Data: 0x00
DEBUG 2014-06-20 10:31:42,097 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/5 Data: 0x00
DEBUG 2014-06-20 10:31:42,097 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/6 Data: 0x00
INFO 2014-06-20 10:31:42,097 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:42,097 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:42,097 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:42,097 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:42,097 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:42,099 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/3 Data: 0x00
DEBUG 2014-06-20 10:31:42,099 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/6 Data: 0x00
INFO 2014-06-20 10:31:42,099 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:42,099 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:42,594 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/18 Data: 0x00
INFO 2014-06-20 10:31:42,594 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:42,595 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/19 Data: 0x00
DEBUG 2014-06-20 10:31:42,595 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/17 Data: 0x00
INFO 2014-06-20 10:31:42,595 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:42,595 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:42,597 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/0 Data: 0x00
DEBUG 2014-06-20 10:31:42,597 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/4 Data: 0x00
DEBUG 2014-06-20 10:31:42,597 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/1 Data: 0x00
INFO 2014-06-20 10:31:42,597 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:42,597 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:42,597 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:42,598 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/4 Data: 0x00
DEBUG 2014-06-20 10:31:42,598 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/2 Data: 0x00
DEBUG 2014-06-20 10:31:42,598 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/5 Data: 0x00
DEBUG 2014-06-20 10:31:42,598 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/6 Data: 0x00
DEBUG 2014-06-20 10:31:42,598 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/5 Data: 0x00
INFO 2014-06-20 10:31:42,598 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:42,598 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:42,598 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:42,598 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:42,598 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:42,600 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/6 Data: 0x00
DEBUG 2014-06-20 10:31:42,600 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/3 Data: 0x00
INFO 2014-06-20 10:31:42,600 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:42,600 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:43,095 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/18 Data: 0x00
INFO 2014-06-20 10:31:43,095 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:43,096 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/19 Data: 0x00
DEBUG 2014-06-20 10:31:43,096 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/17 Data: 0x00
INFO 2014-06-20 10:31:43,096 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:43,096 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:43,098 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/0 Data: 0x00
DEBUG 2014-06-20 10:31:43,098 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/4 Data: 0x00
DEBUG 2014-06-20 10:31:43,098 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/1 Data: 0x00
INFO 2014-06-20 10:31:43,098 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:43,098 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:43,098 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:43,099 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/2 Data: 0x00
DEBUG 2014-06-20 10:31:43,099 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/5 Data: 0x00
DEBUG 2014-06-20 10:31:43,099 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/4 Data: 0x00
DEBUG 2014-06-20 10:31:43,099 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/5 Data: 0x00
DEBUG 2014-06-20 10:31:43,099 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/6 Data: 0x00
INFO 2014-06-20 10:31:43,099 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:43,099 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:43,099 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:43,099 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:43,099 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:43,101 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/3 Data: 0x00
DEBUG 2014-06-20 10:31:43,101 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/6 Data: 0x00
INFO 2014-06-20 10:31:43,101 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:43,101 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:43,596 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/18 Data: 0x00
INFO 2014-06-20 10:31:43,596 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:43,597 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/17 Data: 0x00
DEBUG 2014-06-20 10:31:43,597 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/19 Data: 0x00
INFO 2014-06-20 10:31:43,597 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:43,597 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:43,599 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/4 Data: 0x00
DEBUG 2014-06-20 10:31:43,599 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/1 Data: 0x00
DEBUG 2014-06-20 10:31:43,599 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/0 Data: 0x00
INFO 2014-06-20 10:31:43,599 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:43,599 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:43,599 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:43,600 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/2 Data: 0x00
DEBUG 2014-06-20 10:31:43,600 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/6 Data: 0x00
DEBUG 2014-06-20 10:31:43,600 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/5 Data: 0x00
DEBUG 2014-06-20 10:31:43,600 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/5 Data: 0x00
DEBUG 2014-06-20 10:31:43,600 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/4 Data: 0x00
INFO 2014-06-20 10:31:43,600 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:43,600 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:43,600 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:43,600 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:43,600 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:43,602 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/3 Data: 0x00
DEBUG 2014-06-20 10:31:43,602 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/6 Data: 0x00
INFO 2014-06-20 10:31:43,602 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:43,602 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:44,097 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/18 Data: 0x00
INFO 2014-06-20 10:31:44,097 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:44,098 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/19 Data: 0x00
DEBUG 2014-06-20 10:31:44,098 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/17 Data: 0x00
INFO 2014-06-20 10:31:44,098 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:44,098 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:44,100 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/4 Data: 0x00
DEBUG 2014-06-20 10:31:44,100 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/0 Data: 0x00
DEBUG 2014-06-20 10:31:44,100 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/1 Data: 0x00
INFO 2014-06-20 10:31:44,100 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:44,100 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:44,100 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:44,101 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/5 Data: 0x00
DEBUG 2014-06-20 10:31:44,101 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/2 Data: 0x00
DEBUG 2014-06-20 10:31:44,101 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/5 Data: 0x00
DEBUG 2014-06-20 10:31:44,101 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/6 Data: 0x00
DEBUG 2014-06-20 10:31:44,101 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/4 Data: 0x00
INFO 2014-06-20 10:31:44,101 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:44,101 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:44,101 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:44,101 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:44,101 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:44,103 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/3 Data: 0x00
DEBUG 2014-06-20 10:31:44,103 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/6 Data: 0x00
INFO 2014-06-20 10:31:44,103 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:44,103 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:44,598 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/18 Data: 0x00
INFO 2014-06-20 10:31:44,598 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:44,599 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/19 Data: 0x00
DEBUG 2014-06-20 10:31:44,599 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/17 Data: 0x00
INFO 2014-06-20 10:31:44,599 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:44,599 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:44,601 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/0 Data: 0x00
DEBUG 2014-06-20 10:31:44,601 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/1 Data: 0x00
DEBUG 2014-06-20 10:31:44,601 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/4 Data: 0x00
INFO 2014-06-20 10:31:44,601 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:44,601 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:44,601 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:44,602 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/5 Data: 0x00
DEBUG 2014-06-20 10:31:44,602 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/2 Data: 0x00
DEBUG 2014-06-20 10:31:44,602 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/6 Data: 0x00
DEBUG 2014-06-20 10:31:44,602 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/4 Data: 0x00
DEBUG 2014-06-20 10:31:44,602 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/5 Data: 0x00
INFO 2014-06-20 10:31:44,602 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:44,602 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:44,602 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:44,602 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:44,602 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:44,604 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/3 Data: 0x00
DEBUG 2014-06-20 10:31:44,604 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/6 Data: 0x00
INFO 2014-06-20 10:31:44,604 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:44,604 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:45,099 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/18 Data: 0x00
INFO 2014-06-20 10:31:45,099 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:45,100 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/17 Data: 0x00
DEBUG 2014-06-20 10:31:45,100 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/19 Data: 0x00
INFO 2014-06-20 10:31:45,100 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:45,100 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:45,102 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/0 Data: 0x00
DEBUG 2014-06-20 10:31:45,102 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/4 Data: 0x00
DEBUG 2014-06-20 10:31:45,102 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/1 Data: 0x00
INFO 2014-06-20 10:31:45,102 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:45,102 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:45,102 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:45,103 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/5 Data: 0x00
DEBUG 2014-06-20 10:31:45,103 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/2 Data: 0x00
DEBUG 2014-06-20 10:31:45,103 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/5 Data: 0x00
DEBUG 2014-06-20 10:31:45,103 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/6 Data: 0x00
DEBUG 2014-06-20 10:31:45,103 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/4 Data: 0x00
INFO 2014-06-20 10:31:45,103 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:45,103 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:45,103 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:45,103 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:45,103 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:45,105 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/3 Data: 0x00
DEBUG 2014-06-20 10:31:45,105 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/6 Data: 0x00
INFO 2014-06-20 10:31:45,105 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:45,105 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:45,600 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/18 Data: 0x00
INFO 2014-06-20 10:31:45,600 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:45,601 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/19 Data: 0x00
DEBUG 2014-06-20 10:31:45,601 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/17 Data: 0x00
INFO 2014-06-20 10:31:45,601 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:45,601 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:45,603 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/4 Data: 0x00
DEBUG 2014-06-20 10:31:45,603 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/1 Data: 0x00
DEBUG 2014-06-20 10:31:45,603 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/0 Data: 0x00
INFO 2014-06-20 10:31:45,603 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:45,603 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:45,603 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:45,604 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/4 Data: 0x00
DEBUG 2014-06-20 10:31:45,604 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/5 Data: 0x00
DEBUG 2014-06-20 10:31:45,604 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/5 Data: 0x00
DEBUG 2014-06-20 10:31:45,604 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/6 Data: 0x00
DEBUG 2014-06-20 10:31:45,604 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/2 Data: 0x00
INFO 2014-06-20 10:31:45,604 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:45,604 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:45,604 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:45,604 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:45,604 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:45,606 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/6 Data: 0x00
DEBUG 2014-06-20 10:31:45,606 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/3 Data: 0x00
INFO 2014-06-20 10:31:45,606 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:45,606 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:46,101 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/18 Data: 0x00
INFO 2014-06-20 10:31:46,101 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:46,102 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/19 Data: 0x00
DEBUG 2014-06-20 10:31:46,102 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/17 Data: 0x00
INFO 2014-06-20 10:31:46,102 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:46,102 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:46,104 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/4 Data: 0x00
DEBUG 2014-06-20 10:31:46,104 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/0 Data: 0x00
DEBUG 2014-06-20 10:31:46,104 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/1 Data: 0x00
INFO 2014-06-20 10:31:46,104 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:46,104 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:46,104 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:46,105 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/2 Data: 0x00
DEBUG 2014-06-20 10:31:46,105 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/5 Data: 0x00
DEBUG 2014-06-20 10:31:46,105 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/6 Data: 0x00
DEBUG 2014-06-20 10:31:46,105 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/5 Data: 0x00
DEBUG 2014-06-20 10:31:46,105 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/4 Data: 0x00
INFO 2014-06-20 10:31:46,105 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:46,105 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:46,105 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:46,105 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:46,105 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:46,107 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/3 Data: 0x00
DEBUG 2014-06-20 10:31:46,107 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/6 Data: 0x00
INFO 2014-06-20 10:31:46,107 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:46,107 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:46,602 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/18 Data: 0x00
INFO 2014-06-20 10:31:46,602 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:46,603 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/17 Data: 0x00
DEBUG 2014-06-20 10:31:46,603 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/1/19 Data: 0x00
INFO 2014-06-20 10:31:46,603 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:46,603 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:46,605 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/1 Data: 0x00
DEBUG 2014-06-20 10:31:46,605 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/4 Data: 0x00
DEBUG 2014-06-20 10:31:46,605 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/0 Data: 0x00
INFO 2014-06-20 10:31:46,605 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:46,605 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:46,605 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:46,606 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/2 Data: 0x00
DEBUG 2014-06-20 10:31:46,606 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/6 Data: 0x00
DEBUG 2014-06-20 10:31:46,606 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/4 Data: 0x00
DEBUG 2014-06-20 10:31:46,606 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 1/0/5 Data: 0x00
DEBUG 2014-06-20 10:31:46,606 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/5 Data: 0x00
INFO 2014-06-20 10:31:46,606 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:46,606 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:46,606 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:46,606 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:46,606 (KNX): KNX connection not available.
DEBUG 2014-06-20 10:31:46,608 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/6 Data: 0x00
DEBUG 2014-06-20 10:31:46,608 (KNX): Polling device status for [FRAME] L_Data.req 0.0.0 -> 2/7/3 Data: 0x00
INFO 2014-06-20 10:31:46,608 (KNX): KNX connection not available.
INFO 2014-06-20 10:31:46,608 (KNX): KNX connection not available.

Looks like the FreeNAS does not find the KNX gateway. You can try and configure the KNX gateway in the properties file.

Posted by mredeker at Jun 22, 2014 19:16

By properties file, did you mean the config.properties file?

This is how my config.properties is for the KNX part. The IP address of the KNX gateway is entered.

#-----------------------------------------------------------------------
#
# KNX CONFIGURATION:
# 
# Optional configuration related to KNX-IP interface management.

##
# KNX-IP interface host name to use. If no hostname is provided here,
# the KNX-IP driver will use first interface to be discovered.
knx.ip.interface.hostname=192.168.41.7

##
# KNX-IP interface UDP port to use. This configuration is mandatory only 
# if a KNX-IP interface hostname is provided 
knx.ip.interface.port=3671


#
#------------------------------------------------ end of KNX ---------
Posted by ggraja at Jun 23, 2014 00:32

That is, what I ment.
Looks ok. Maybe something else is blocking the connection? Do you also have your PC or maybe ETS connected to KNX gateway?

Posted by mredeker at Jun 23, 2014 10:01

I ensured the PC and ETS were not connected to the gateway.

Infact I have two KNX IP gateways with one of them dedicated exclusively for OpenRemote. I use the other for ETS when required.

Posted by ggraja at Jun 24, 2014 07:14
Document generated by Confluence on Jun 05, 2016 09:37