This page last changed on Sep 24, 2014 by waraxtle.

Dear Sir,

i have a problem with gateway in subject.

I have completed all the pass to install openremote and to create a controller on windows 7 machine with java 1.6.45. I see my controller on localhost.

I have set knx.ip.interface.hostname=192.168.1.2 in C:\OpenRemote-Controller\webapps\controller\WEB-INF\classes\config.properties but no packet are sent to this address. I inspect this with Wireshark.

All the discovery packet are to multicast ip 224.0.23.12 but gateway do not respond to this packet.

Can you help me?
Thanks

Can you ping your KNX gateway from your windows machine?
Do you see something in the controller log files?

Posted by mredeker at Sep 25, 2014 09:23

Yes i ping my gateway from my windows machine.

This is my KNX log
INFO 2014-09-25 11:55:33,414 (KNX): KNX IP interface hostname set to '192.168.1.2'
INFO 2014-09-25 11:55:33,414 (KNX): KNX IP interface port set to '3671'
INFO 2014-09-25 11:55:33,414 (KNX): KNX PhysicalBus clazz set to 'org.openremote.controller.protocol.port.DatagramSocketPort'
INFO 2014-09-25 11:55:33,415 (KNX): Scheduled reconnection task
WARN 2014-09-25 11:55:33,415 (KNX): Unknown KNX property '<property name = "name" value = "StatoLamp1"/>'.
INFO 2014-09-25 11:55:33,416 (KNX): Trying to create connection
INFO 2014-09-25 11:55:33,416 (KNX): Removing connection
INFO 2014-09-25 11:55:33,418 (KNX): KNX Connection manager resolving local host IP addresses...
INFO 2014-09-25 11:55:33,439 (KNX): Skipping loopback interface: name:lo (Software Loopback Interface 1)
INFO 2014-09-25 11:55:33,439 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 0/0/2 Data: 0x00 for group address '0/0/2'
INFO 2014-09-25 11:55:33,440 (KNX): Skipping disabled NIC: name:net0 (WAN Miniport (SSTP))
INFO 2014-09-25 11:55:33,440 (KNX): Skipping disabled NIC: name:net1 (WAN Miniport (L2TP))
INFO 2014-09-25 11:55:33,441 (KNX): Skipping disabled NIC: name:net2 (WAN Miniport (PPTP))
INFO 2014-09-25 11:55:33,442 (KNX): Skipping disabled NIC: name:ppp0 (WAN Miniport (PPPOE))
INFO 2014-09-25 11:55:33,443 (KNX): Skipping disabled NIC: name:eth0 (WAN Miniport (IPv6))
INFO 2014-09-25 11:55:33,444 (KNX): Skipping disabled NIC: name:eth1 (WAN Miniport (Network Monitor))
INFO 2014-09-25 11:55:33,444 (KNX): Skipping disabled NIC: name:eth2 (WAN Miniport (IP))
INFO 2014-09-25 11:55:33,445 (KNX): Skipping disabled NIC: name:ppp1 (RAS Async Adapter)
INFO 2014-09-25 11:55:33,446 (KNX): Skipping disabled NIC: name:net3 (WAN Miniport (IKEv2))
INFO 2014-09-25 11:55:33,448 (KNX): KNX connection not available.
INFO 2014-09-25 11:55:33,449 (KNX): Found candidate NIC: name:eth3 (Realtek PCIe GBE Family Controller)
INFO 2014-09-25 11:55:33,449 (KNX): Skipped IPv6 address (not supported by KNX) /fe80:0:0:0:347e:5d2e:9bfc:f7ea%11
INFO 2014-09-25 11:55:33,449 (KNX): Added candidate IP address to set - /192.168.1.16
INFO 2014-09-25 11:55:33,451 (KNX): Skipping disabled NIC: name:net4 (Teredo Tunneling Pseudo-Interface)
INFO 2014-09-25 11:55:33,452 (KNX): Skipping disabled NIC: name:net5 (Microsoft ISATAP Adapter #2)
INFO 2014-09-25 11:55:33,453 (KNX): Skipping disabled NIC: name:net6 (Microsoft ISATAP Adapter)
INFO 2014-09-25 11:55:33,456 (KNX): Found candidate NIC: name:eth4 (VirtualBox Host-Only Ethernet Adapter)
INFO 2014-09-25 11:55:33,456 (KNX): Skipped IPv6 address (not supported by KNX) /fe80:0:0:0:bd2f:da35:2793:7574%15
INFO 2014-09-25 11:55:33,456 (KNX): Added candidate IP address to set - /192.168.56.1
INFO 2014-09-25 11:55:33,457 (KNX): Skipping disabled NIC: name:eth5 (Realtek PCIe GBE Family Controller - VirtualBox Bridged Networking Driver Miniport)
INFO 2014-09-25 11:55:33,458 (KNX): Skipping disabled NIC: name:net7 (Microsoft ISATAP Adapter #3)
INFO 2014-09-25 11:55:33,459 (KNX): Skipping disabled NIC: name:eth6 (WAN Miniport (Network Monitor)-QoS Packet Scheduler-0000)
INFO 2014-09-25 11:55:33,459 (KNX): Skipping disabled NIC: name:eth7 (WAN Miniport (IP)-QoS Packet Scheduler-0000)
INFO 2014-09-25 11:55:33,460 (KNX): Skipping disabled NIC: name:eth8 (WAN Miniport (IPv6)-QoS Packet Scheduler-0000)
INFO 2014-09-25 11:55:33,461 (KNX): Skipping disabled NIC: name:eth9 (VirtualBox Host-Only Ethernet Adapter-QoS Packet Scheduler-0000)
INFO 2014-09-25 11:55:33,462 (KNX): Skipping disabled NIC: name:eth10 (VirtualBox Host-Only Ethernet Adapter-WFP LightWeight Filter-0000)
INFO 2014-09-25 11:55:33,463 (KNX): Skipping disabled NIC: name:eth11 (Realtek PCIe GBE Family Controller - VirtualBox Bridged Networking Driver Miniport-QoS Packet Scheduler-0000)
INFO 2014-09-25 11:55:33,464 (KNX): Skipping disabled NIC: name:eth12 (Realtek PCIe GBE Family Controller - VirtualBox Bridged Networking Driver Miniport-WFP LightWeight Filter-0000)
INFO 2014-09-25 11:55:33,949 (KNX): KNX connection not available.
INFO 2014-09-25 11:55:34,449 (KNX): KNX connection not available.
INFO 2014-09-25 11:55:34,949 (KNX): KNX connection not available.
INFO 2014-09-25 11:55:35,449 (KNX): KNX connection not available.
INFO 2014-09-25 11:55:35,949 (KNX): KNX connection not available.
INFO 2014-09-25 11:55:36,449 (KNX): KNX connection not available.
INFO 2014-09-25 11:55:36,949 (KNX): KNX connection not available.
INFO 2014-09-25 11:55:37,449 (KNX): KNX connection not available.
INFO 2014-09-25 11:55:37,950 (KNX): KNX connection not available.
INFO 2014-09-25 11:55:38,450 (KNX): KNX connection not available.
INFO 2014-09-25 11:55:38,950 (KNX): KNX connection not available.
INFO 2014-09-25 11:55:39,451 (KNX): KNX connection not available.
INFO 2014-09-25 11:55:39,951 (KNX): KNX connection not available.
INFO 2014-09-25 11:55:40,452 (KNX): KNX connection not available.
INFO 2014-09-25 11:55:40,952 (KNX): KNX connection not available.
INFO 2014-09-25 11:55:41,452 (KNX): KNX connection not available.
INFO 2014-09-25 11:55:41,952 (KNX): KNX connection not available.
INFO 2014-09-25 11:55:42,452 (KNX): KNX connection not available.
INFO 2014-09-25 11:55:42,952 (KNX): KNX connection not available.
INFO 2014-09-25 11:55:43,452 (KNX): KNX connection not available.
WARN 2014-09-25 11:55:43,495 (KNX): Could not connect
org.openremote.controller.protocol.knx.ConnectionException: KNX-IP interface not found
at org.openremote.controller.protocol.knx.KNXIpConnectionManager.waitForConnection(KNXIpConnectionManager.java:266)
at org.openremote.controller.protocol.knx.KNXIpConnectionManager.getConnection(KNXIpConnectionManager.java:224)
at org.openremote.controller.protocol.knx.KNXIpConnectionManager$ConnectionTask.run(KNXIpConnectionManager.java:994)
at java.util.TimerThread.mainLoop(Timer.java:512)
at java.util.TimerThread.run(Timer.java:462)
INFO 2014-09-25 11:55:43,496 (KNX): Trying to create connection
INFO 2014-09-25 11:55:43,496 (KNX): Removing connection
INFO 2014-09-25 11:55:43,497 (KNX): KNX-IP socket listener IOException
java.net.SocketException: socket closed
at java.net.PlainDatagramSocketImpl.receive0(Native Method)
at java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:145)
at java.net.DatagramSocket.receive(DatagramSocket.java:725)
at org.openremote.controller.protocol.port.DatagramSocketPort.receive(DatagramSocketPort.java:78)
at org.openremote.controller.protocol.knx.ip.IpProcessor$PhysicalBusListener.run(IpProcessor.java:82)
WARN 2014-09-25 11:55:43,497 (KNX): KNX-IP socket listener stopped
INFO 2014-09-25 11:55:43,498 (KNX): KNX-IP socket listener IOException
java.net.SocketException: socket closed
at java.net.PlainDatagramSocketImpl.receive0(Native Method)
at java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:145)
at java.net.DatagramSocket.receive(DatagramSocket.java:725)
at org.openremote.controller.protocol.port.DatagramSocketPort.receive(DatagramSocketPort.java:78)
at org.openremote.controller.protocol.knx.ip.IpProcessor$PhysicalBusListener.run(IpProcessor.java:82)
WARN 2014-09-25 11:55:43,498 (KNX): KNX-IP socket listener stopped

I have close ets4, power off gateway for one minutes and reconnect. After i have started openremote but the result is the same.

I have used this gateway with ets4 and create a project without problem. I have imported this project in designer.

I have opened a new project in microsoft c# and send first connection packet to my gateway and it respond to this packet but only if i send this packet to unicast ip address "192.168.1.2". It do not respond to multicast ip.

Your discovery procedure send packet only on multicast ip.

Can i send packet to unicast ip? Can i set a variable?

Thanks for your help

Posted by waraxtle at Sep 25, 2014 13:47

Hello everybody,

i have the same problem like "Antonio Battaglia", my controller also couldn't find my KNX-IP Interface (Weinzierl KNX Gateway 730). I also use a fixed IP in the config.

But with the software "ayControl" i can control KNX components. Could anybody help me?

Thanks

Posted by bpmman at Dec 26, 2015 22:35

Dear Sir,

I have modified the openremote source in discovery procedure and now i use fixed ip.

Best regards

Posted by waraxtle at Dec 28, 2015 15:04

Could you send me the modifications? Maybe I can merge into our code base.
Thanks,
-Marcus (marcus at openremote dot org)

Posted by mredeker at Dec 28, 2015 18:49

I made this modification in past year and i don't know if you can merge into new versione of code.

I block discovery multicast procedure and get data from a configuration file with fixed parameter.

You should be, in my opinion, stop the discovery procedure after a timer and get fixed ip from a configuration file.
In alternative, put a fixed ip parameter in configuration file and leave empty the string. If a user put a string with ip or dns name don't use discovery multicast and use a fixed parameter.

Best regards.
Antonio Battaglia

Posted by waraxtle at Dec 29, 2015 09:07

Sorry I don't understand it up to 100%.
But i will explain my situation to you.

I use an normal desktop PC with Windows 10(192.168.0.248) and an installed OR conrtoller in the version of 2.1.0 and 2.1.1.
My KNX IP Gateway is from Weinzierl (730) and use the following IP 192.168.0.101. (i can ping this address, use the gateway in ETS and i also use it with ayControl)
In the config.properties file i changed only one thing, i put the IP above at this line "knx.ip.interface.hostname=192.168.0.101"

But i found this in the knx.log:

INFO 2015-12-29 14:56:01,240 (KNX): KNX IP interface hostname set to '192.168.0.101'
INFO 2015-12-29 14:56:01,241 (KNX): KNX IP interface port set to '3671'
INFO 2015-12-29 14:56:01,241 (KNX): KNX PhysicalBus clazz set to 'org.openremote.controller.protocol.port.DatagramSocketPort'
INFO 2015-12-29 14:56:01,242 (KNX): Scheduled reconnection task
WARN 2015-12-29 14:56:01,242 (KNX): Unknown KNX property '<property name = "name" value = "Büro Decke Status"/>'.
INFO 2015-12-29 14:56:01,245 (KNX): Trying to create connection
INFO 2015-12-29 14:56:01,245 (KNX): Removing connection
INFO 2015-12-29 14:56:01,247 (KNX): KNX Connection manager resolving local host IP addresses...
INFO 2015-12-29 14:56:01,270 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/0/18 Data: 0x00 for group address '1/0/18'
WARN 2015-12-29 14:56:01,281 (KNX): Unknown KNX property '<property name = "name" value = "Wohnzimmer Decke Status"/>'.
INFO 2015-12-29 14:56:01,281 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/0/19 Data: 0x00 for group address '1/0/19'
WARN 2015-12-29 14:56:01,285 (KNX): Unknown KNX property '<property name = "name" value = "Wohnzimmer Wand Status"/>'.
INFO 2015-12-29 14:56:01,285 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/0/20 Data: 0x00 for group address '1/0/20'
WARN 2015-12-29 14:56:01,289 (KNX): Unknown KNX property '<property name = "name" value = "Esszimmer Decke Status"/>'.
INFO 2015-12-29 14:56:01,289 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/0/21 Data: 0x00 for group address '1/0/21'
INFO 2015-12-29 14:56:01,290 (KNX): Skipping loopback interface: name:lo (Software Loopback Interface 1)
INFO 2015-12-29 14:56:01,291 (KNX): Skipping disabled NIC: name:net0 (Microsoft ISATAP Adapter #3)
INFO 2015-12-29 14:56:01,292 (KNX): Skipping disabled NIC: name:eth0 (VMware Virtual Ethernet Adapter for VMnet1)
WARN 2015-12-29 14:56:01,293 (KNX): Unknown KNX property '<property name = "name" value = "WC Decke Status"/>'.
INFO 2015-12-29 14:56:01,293 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/0/17 Data: 0x00 for group address '1/0/17'
INFO 2015-12-29 14:56:01,293 (KNX): Skipping disabled NIC: name:net1 (Microsoft ISATAP Adapter #2)
INFO 2015-12-29 14:56:01,294 (KNX): Skipping disabled NIC: name:eth1 (VMware Virtual Ethernet Adapter for VMnet8)
INFO 2015-12-29 14:56:01,295 (KNX): Skipping disabled NIC: name:ppp0 (WAN Miniport (PPPOE))
INFO 2015-12-29 14:56:01,295 (KNX): Skipping disabled NIC: name:net2 (WAN Miniport (PPTP))
WARN 2015-12-29 14:56:01,296 (KNX): Unknown KNX property '<property name = "name" value = "HWR Ist"/>'.
INFO 2015-12-29 14:56:01,296 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 4/0/6 Data: 0x00 for group address '4/0/6'
INFO 2015-12-29 14:56:01,296 (KNX): Skipping disabled NIC: name:eth2 (WAN Miniport (IPv6))
INFO 2015-12-29 14:56:01,297 (KNX): Skipping disabled NIC: name:eth3 (WAN Miniport (IP))
INFO 2015-12-29 14:56:01,298 (KNX): Skipping disabled NIC: name:eth4 (Shrew Soft Virtual Adapter)
INFO 2015-12-29 14:56:01,299 (KNX): Skipping disabled NIC: name:eth5 (Microsoft Kerneldebugger-Netzwerkadapter)
WARN 2015-12-29 14:56:01,299 (KNX): Unknown KNX property '<property name = "name" value = "Garagentor Status"/>'.
INFO 2015-12-29 14:56:01,300 (KNX): Skipping disabled NIC: name:net3 (WAN Miniport (L2TP))
INFO 2015-12-29 14:56:01,300 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 0/2/6 Data: 0x00 for group address '0/2/6'
INFO 2015-12-29 14:56:01,300 (KNX): Skipping disabled NIC: name:net4 (WAN Miniport (SSTP))
INFO 2015-12-29 14:56:01,301 (KNX): Skipping disabled NIC: name:net5 (Microsoft ISATAP Adapter)
INFO 2015-12-29 14:56:01,302 (KNX): Skipping disabled NIC: name:net6 (WAN Miniport (IKEv2))
WARN 2015-12-29 14:56:01,303 (KNX): Unknown KNX property '<property name = "name" value = "Fassade Hof Status"/>'.
INFO 2015-12-29 14:56:01,303 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/3/21 Data: 0x00 for group address '1/3/21'
INFO 2015-12-29 14:56:01,304 (KNX): Found candidate NIC: name:eth6 (Realtek PCIe GBE Family Controller)
INFO 2015-12-29 14:56:01,305 (KNX): Added candidate IP address to set - /192.168.0.248
INFO 2015-12-29 14:56:01,306 (KNX): Skipping disabled NIC: name:net7 (Microsoft ISATAP Adapter #4)
WARN 2015-12-29 14:56:01,306 (KNX): Unknown KNX property '<property name = "name" value = "Garage Wand Status"/>'.
INFO 2015-12-29 14:56:01,307 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/3/20 Data: 0x00 for group address '1/3/20'
INFO 2015-12-29 14:56:01,307 (KNX): Skipping disabled NIC: name:eth7 (WAN Miniport (Network Monitor))
INFO 2015-12-29 14:56:01,307 (KNX): Skipping disabled NIC: name:eth8 (Realtek PCIe GBE Family Controller-WFP Native MAC Layer LightWeight Filter-0000)
INFO 2015-12-29 14:56:01,308 (KNX): Skipping disabled NIC: name:eth9 (Realtek PCIe GBE Family Controller-Shrew Soft Lightweight Filter-0000)
INFO 2015-12-29 14:56:01,309 (KNX): Skipping disabled NIC: name:eth10 (Realtek PCIe GBE Family Controller-QoS Packet Scheduler-0000)
WARN 2015-12-29 14:56:01,310 (KNX): Unknown KNX property '<property name = "name" value = "Terrasse Decke Status"/>'.
INFO 2015-12-29 14:56:01,310 (KNX): Skipping disabled NIC: name:eth11 (Realtek PCIe GBE Family Controller-WFP 802.3 MAC Layer LightWeight Filter-0000)
INFO 2015-12-29 14:56:01,310 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/3/16 Data: 0x00 for group address '1/3/16'
INFO 2015-12-29 14:56:01,311 (KNX): Skipping disabled NIC: name:eth12 (WAN Miniport (IP)-WFP Native MAC Layer LightWeight Filter-0000)
INFO 2015-12-29 14:56:01,312 (KNX): Skipping disabled NIC: name:eth13 (WAN Miniport (IP)-Shrew Soft Lightweight Filter-0000)
INFO 2015-12-29 14:56:01,312 (KNX): Skipping disabled NIC: name:eth14 (WAN Miniport (IP)-QoS Packet Scheduler-0000)
WARN 2015-12-29 14:56:01,313 (KNX): Unknown KNX property '<property name = "name" value = "Küche Ist"/>'.
INFO 2015-12-29 14:56:01,313 (KNX): Skipping disabled NIC: name:eth15 (WAN Miniport (IPv6)-WFP Native MAC Layer LightWeight Filter-0000)
INFO 2015-12-29 14:56:01,313 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 4/0/7 Data: 0x00 for group address '4/0/7'
INFO 2015-12-29 14:56:01,314 (KNX): Skipping disabled NIC: name:eth16 (WAN Miniport (IPv6)-Shrew Soft Lightweight Filter-0000)
INFO 2015-12-29 14:56:01,315 (KNX): Skipping disabled NIC: name:eth17 (WAN Miniport (IPv6)-QoS Packet Scheduler-0000)
INFO 2015-12-29 14:56:01,316 (KNX): Skipping disabled NIC: name:eth18 (WAN Miniport (Network Monitor)-WFP Native MAC Layer LightWeight Filter-0000)
INFO 2015-12-29 14:56:01,317 (KNX): Skipping disabled NIC: name:eth19 (WAN Miniport (Network Monitor)-Shrew Soft Lightweight Filter-0000)
WARN 2015-12-29 14:56:01,317 (KNX): Unknown KNX property '<property name = "name" value = "Wohnzimmer Ist"/>'.
INFO 2015-12-29 14:56:01,317 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 4/0/9 Data: 0x00 for group address '4/0/9'
INFO 2015-12-29 14:56:01,317 (KNX): Skipping disabled NIC: name:eth20 (WAN Miniport (Network Monitor)-QoS Packet Scheduler-0000)
INFO 2015-12-29 14:56:01,320 (KNX): Skipping point-to-point interface: name:net8 (Teredo Tunneling Pseudo-Interface)
WARN 2015-12-29 14:56:01,320 (KNX): Unknown KNX property '<property name = "name" value = "Büro Ist"/>'.
INFO 2015-12-29 14:56:01,321 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 4/0/10 Data: 0x00 for group address '4/0/10'
WARN 2015-12-29 14:56:01,324 (KNX): Unknown KNX property '<property name = "name" value = "Flur/WC Ist"/>'.
INFO 2015-12-29 14:56:01,324 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 4/0/11 Data: 0x00 for group address '4/0/11'
WARN 2015-12-29 14:56:01,327 (KNX): Unknown KNX property '<property name = "name" value = "Flur(OG) Ist"/>'.
INFO 2015-12-29 14:56:01,327 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 4/1/6 Data: 0x00 for group address '4/1/6'
WARN 2015-12-29 14:56:01,331 (KNX): Unknown KNX property '<property name = "name" value = "Bad Ist"/>'.
INFO 2015-12-29 14:56:01,331 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 4/1/7 Data: 0x00 for group address '4/1/7'
WARN 2015-12-29 14:56:01,334 (KNX): Unknown KNX property '<property name = "name" value = "Kind 1 Ist"/>'.
INFO 2015-12-29 14:56:01,334 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 4/1/8 Data: 0x00 for group address '4/1/8'
WARN 2015-12-29 14:56:01,337 (KNX): Unknown KNX property '<property name = "name" value = "Kind 2 Ist"/>'.
INFO 2015-12-29 14:56:01,338 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 4/1/9 Data: 0x00 for group address '4/1/9'
WARN 2015-12-29 14:56:01,340 (KNX): Unknown KNX property '<property name = "name" value = "Schlafzimmer Ist"/>'.
INFO 2015-12-29 14:56:01,340 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 4/1/10 Data: 0x00 for group address '4/1/10'
WARN 2015-12-29 14:56:01,343 (KNX): Unknown KNX property '<property name = "name" value = "Flur Einbaustrahler Status"/>'.
INFO 2015-12-29 14:56:01,344 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/1/15 Data: 0x00 for group address '1/1/15'
WARN 2015-12-29 14:56:01,347 (KNX): Unknown KNX property '<property name = "name" value = "Kind1 Decke Status"/>'.
INFO 2015-12-29 14:56:01,347 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/1/16 Data: 0x00 for group address '1/1/16'
WARN 2015-12-29 14:56:01,350 (KNX): Unknown KNX property '<property name = "name" value = "Kind1 Einbaustrahler Status"/>'.
INFO 2015-12-29 14:56:01,350 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/1/17 Data: 0x00 for group address '1/1/17'
WARN 2015-12-29 14:56:01,353 (KNX): Unknown KNX property '<property name = "name" value = "Kind2 Status"/>'.
INFO 2015-12-29 14:56:01,354 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/1/18 Data: 0x00 for group address '1/1/18'
WARN 2015-12-29 14:56:01,357 (KNX): Unknown KNX property '<property name = "name" value = "Kind2 Einbaustrahler Status"/>'.
INFO 2015-12-29 14:56:01,357 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/1/19 Data: 0x00 for group address '1/1/19'
WARN 2015-12-29 14:56:01,360 (KNX): Unknown KNX property '<property name = "name" value = "Schlafen Decke Status"/>'.
INFO 2015-12-29 14:56:01,360 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/1/20 Data: 0x00 for group address '1/1/20'
WARN 2015-12-29 14:56:01,364 (KNX): Unknown KNX property '<property name = "name" value = "Ankleide Decke Status"/>'.
INFO 2015-12-29 14:56:01,364 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/1/21 Data: 0x00 for group address '1/1/21'
WARN 2015-12-29 14:56:01,367 (KNX): Unknown KNX property '<property name = "name" value = "Abstell OG Decke Status"/>'.
INFO 2015-12-29 14:56:01,367 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/1/22 Data: 0x00 for group address '1/1/22'
WARN 2015-12-29 14:56:01,370 (KNX): Unknown KNX property '<property name = "name" value = "Bad Decke Status"/>'.
INFO 2015-12-29 14:56:01,370 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/1/23 Data: 0x00 for group address '1/1/23'
WARN 2015-12-29 14:56:01,372 (KNX): Unknown KNX property '<property name = "name" value = "Bad Spiegel(hinter) Status"/>'.
INFO 2015-12-29 14:56:01,373 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/1/24 Data: 0x00 for group address '1/1/24'
WARN 2015-12-29 14:56:01,375 (KNX): Unknown KNX property '<property name = "name" value = "Bad Spiegel Status"/>'.
INFO 2015-12-29 14:56:01,375 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/1/25 Data: 0x00 for group address '1/1/25'
WARN 2015-12-29 14:56:01,378 (KNX): Unknown KNX property '<property name = "name" value = "Bad Nische Status"/>'.
INFO 2015-12-29 14:56:01,378 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/1/26 Data: 0x00 for group address '1/1/26'
WARN 2015-12-29 14:56:01,381 (KNX): Unknown KNX property '<property name = "name" value = "Bad Stufe Status"/>'.
INFO 2015-12-29 14:56:01,382 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/1/27 Data: 0x00 for group address '1/1/27'
WARN 2015-12-29 14:56:01,384 (KNX): Unknown KNX property '<property name = "name" value = "Bad Dusche Status"/>'.
INFO 2015-12-29 14:56:01,385 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/1/28 Data: 0x00 for group address '1/1/28'
WARN 2015-12-29 14:56:01,387 (KNX): Unknown KNX property '<property name = "name" value = "Dachboden Status"/>'.
INFO 2015-12-29 14:56:01,388 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/1/29 Data: 0x00 for group address '1/1/29'
WARN 2015-12-29 14:56:01,390 (KNX): Unknown KNX property '<property name = "name" value = "Flur Decke Status"/>'.
INFO 2015-12-29 14:56:01,390 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/0/15 Data: 0x00 for group address '1/0/15'
WARN 2015-12-29 14:56:01,394 (KNX): Unknown KNX property '<property name = "name" value = "Garderobe Decke Status"/>'.
INFO 2015-12-29 14:56:01,394 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/0/16 Data: 0x00 for group address '1/0/16'
WARN 2015-12-29 14:56:01,397 (KNX): Unknown KNX property '<property name = "name" value = "Küche Einbaustrahler Arbeitsplatte Status"/>'.
INFO 2015-12-29 14:56:01,397 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/0/22 Data: 0x00 for group address '1/0/22'
WARN 2015-12-29 14:56:01,400 (KNX): Unknown KNX property '<property name = "name" value = "Küche Einbaustrahler Durchgang Status"/>'.
INFO 2015-12-29 14:56:01,400 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/0/23 Data: 0x00 for group address '1/0/23'
WARN 2015-12-29 14:56:01,402 (KNX): Unknown KNX property '<property name = "name" value = "Küche Hängeschränke Status"/>'.
INFO 2015-12-29 14:56:01,403 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/0/24 Data: 0x00 for group address '1/0/24'
WARN 2015-12-29 14:56:01,405 (KNX): Unknown KNX property '<property name = "name" value = "HWR Decke Status"/>'.
INFO 2015-12-29 14:56:01,405 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/0/25 Data: 0x00 for group address '1/0/25'
WARN 2015-12-29 14:56:01,409 (KNX): Unknown KNX property '<property name = "name" value = "Abstell Decke Status"/>'.
INFO 2015-12-29 14:56:01,409 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/0/26 Data: 0x00 for group address '1/0/26'
WARN 2015-12-29 14:56:01,412 (KNX): Unknown KNX property '<property name = "name" value = "Esszimmer Wand Status"/>'.
INFO 2015-12-29 14:56:01,412 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/0/27 Data: 0x00 for group address '1/0/27'
WARN 2015-12-29 14:56:01,416 (KNX): Unknown KNX property '<property name = "name" value = "Eingang Wand Status"/>'.
INFO 2015-12-29 14:56:01,417 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/3/12 Data: 0x00 for group address '1/3/12'
WARN 2015-12-29 14:56:01,420 (KNX): Unknown KNX property '<property name = "name" value = "Balkon Status"/>'.
INFO 2015-12-29 14:56:01,420 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/3/13 Data: 0x00 for group address '1/3/13'
WARN 2015-12-29 14:56:01,422 (KNX): Unknown KNX property '<property name = "name" value = "Fassade Terrasse Decke Status"/>'.
INFO 2015-12-29 14:56:01,422 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/3/14 Data: 0x00 for group address '1/3/14'
WARN 2015-12-29 14:56:01,425 (KNX): Unknown KNX property '<property name = "name" value = "Garten Grill Status"/>'.
INFO 2015-12-29 14:56:01,425 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/3/15 Data: 0x00 for group address '1/3/15'
WARN 2015-12-29 14:56:01,428 (KNX): Unknown KNX property '<property name = "name" value = "Wasserspiel Status"/>'.
INFO 2015-12-29 14:56:01,428 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/3/17 Data: 0x00 for group address '1/3/17'
WARN 2015-12-29 14:56:01,431 (KNX): Unknown KNX property '<property name = "name" value = "Garten Mauer Status"/>'.
INFO 2015-12-29 14:56:01,431 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/3/18 Data: 0x00 for group address '1/3/18'
WARN 2015-12-29 14:56:01,433 (KNX): Unknown KNX property '<property name = "name" value = "Einbaustrahler Duchgang Status"/>'.
INFO 2015-12-29 14:56:01,434 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/3/19 Data: 0x00 for group address '1/3/19'
WARN 2015-12-29 14:56:01,438 (KNX): Unknown KNX property '<property name = "name" value = "Stufen Status"/>'.
INFO 2015-12-29 14:56:01,438 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/2/2 Data: 0x00 for group address '1/2/2'
WARN 2015-12-29 14:56:01,440 (KNX): Unknown KNX property '<property name = "name" value = "Garage Decke Status"/>'.
INFO 2015-12-29 14:56:01,441 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/5/4 Data: 0x00 for group address '1/5/4'
WARN 2015-12-29 14:56:01,444 (KNX): Unknown KNX property '<property name = "name" value = "Garage Dartscheiben Status"/>'.
INFO 2015-12-29 14:56:01,444 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/5/5 Data: 0x00 for group address '1/5/5'
WARN 2015-12-29 14:56:01,446 (KNX): Unknown KNX property '<property name = "name" value = "Garage Werkstatt Status"/>'.
INFO 2015-12-29 14:56:01,447 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/5/6 Data: 0x00 for group address '1/5/6'
WARN 2015-12-29 14:56:01,449 (KNX): Unknown KNX property '<property name = "name" value = "Garage WC Status"/>'.
INFO 2015-12-29 14:56:01,449 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 1/5/7 Data: 0x00 for group address '1/5/7'
WARN 2015-12-29 14:56:01,452 (KNX): Unknown KNX property '<property name = "name" value = "Oben Stopp"/>'.
INFO 2015-12-29 14:56:01,452 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 3/1/11 Data: 0x00 for group address '3/1/11'
WARN 2015-12-29 14:56:01,455 (KNX): Unknown KNX property '<property name = "name" value = "HWR Ist"/>'.
INFO 2015-12-29 14:56:01,455 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 4/0/6 Data: 0x00 for group address '4/0/6'
WARN 2015-12-29 14:56:01,459 (KNX): Unknown KNX property '<property name = "name" value = "Küche Ist"/>'.
INFO 2015-12-29 14:56:01,459 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 4/0/7 Data: 0x00 for group address '4/0/7'
WARN 2015-12-29 14:56:01,462 (KNX): Unknown KNX property '<property name = "name" value = "Wohnzimmer Ist"/>'.
INFO 2015-12-29 14:56:01,462 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 4/0/9 Data: 0x00 for group address '4/0/9'
WARN 2015-12-29 14:56:01,465 (KNX): Unknown KNX property '<property name = "name" value = "Büro Ist"/>'.
INFO 2015-12-29 14:56:01,465 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 4/0/10 Data: 0x00 for group address '4/0/10'
WARN 2015-12-29 14:56:01,468 (KNX): Unknown KNX property '<property name = "name" value = "Flur/WC Ist"/>'.
INFO 2015-12-29 14:56:01,468 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 4/0/11 Data: 0x00 for group address '4/0/11'
WARN 2015-12-29 14:56:01,470 (KNX): Unknown KNX property '<property name = "name" value = "Flur(OG) Ist"/>'.
INFO 2015-12-29 14:56:01,470 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 4/1/6 Data: 0x00 for group address '4/1/6'
WARN 2015-12-29 14:56:01,473 (KNX): Unknown KNX property '<property name = "name" value = "Bad Ist"/>'.
INFO 2015-12-29 14:56:01,473 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 4/1/7 Data: 0x00 for group address '4/1/7'
WARN 2015-12-29 14:56:01,475 (KNX): Unknown KNX property '<property name = "name" value = "Kind 1 Ist"/>'.
INFO 2015-12-29 14:56:01,475 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 4/1/8 Data: 0x00 for group address '4/1/8'
WARN 2015-12-29 14:56:01,478 (KNX): Unknown KNX property '<property name = "name" value = "Kind 2 Ist"/>'.
INFO 2015-12-29 14:56:01,478 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 4/1/9 Data: 0x00 for group address '4/1/9'
WARN 2015-12-29 14:56:01,480 (KNX): Unknown KNX property '<property name = "name" value = "Schlafzimmer Ist"/>'.
INFO 2015-12-29 14:56:01,480 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 4/1/10 Data: 0x00 for group address '4/1/10'
WARN 2015-12-29 14:56:01,483 (KNX): Unknown KNX property '<property name = "name" value = "Steckdose Eingang Status"/>'.
INFO 2015-12-29 14:56:01,483 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 2/2/4 Data: 0x00 for group address '2/2/4'
WARN 2015-12-29 14:56:01,485 (KNX): Unknown KNX property '<property name = "name" value = "Steckdose Terrasse Status"/>'.
INFO 2015-12-29 14:56:01,485 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 2/2/5 Data: 0x00 for group address '2/2/5'
WARN 2015-12-29 14:56:01,488 (KNX): Unknown KNX property '<property name = "name" value = "Steckdose Balkon1 Status"/>'.
INFO 2015-12-29 14:56:01,488 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 2/2/6 Data: 0x00 for group address '2/2/6'
WARN 2015-12-29 14:56:01,490 (KNX): Unknown KNX property '<property name = "name" value = "Steckdose Balkon2 Status"/>'.
INFO 2015-12-29 14:56:01,490 (KNX): Created KNX Command FRAME L_Data.req 0.0.0 -> 2/2/7 Data: 0x00 for group address '2/2/7'
INFO 2015-12-29 14:56:01,492 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,492 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,492 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,493 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,493 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,493 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,493 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,494 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,494 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,494 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,495 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,495 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,495 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,495 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,496 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,496 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,496 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,497 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,497 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,497 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,497 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,498 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,498 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,499 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,499 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,499 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,499 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,500 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,500 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,500 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,500 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,501 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,501 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,501 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,501 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,502 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,502 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,502 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,502 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,502 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,503 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,503 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,503 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,504 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,504 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,504 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,504 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,505 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,505 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,505 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,506 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,506 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,506 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,506 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,507 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,507 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,507 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,508 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,508 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,508 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,509 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,509 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,509 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,509 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,510 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,510 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,510 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,511 (KNX): KNX connection not available.
INFO 2015-12-29 14:56:01,511 (KNX): KNX connection not available.
WARN 2015-12-29 14:56:11,336 (KNX): Could not connect
org.openremote.controller.protocol.knx.ConnectionException: KNX-IP interface not found
at org.openremote.controller.protocol.knx.KNXIpConnectionManager.waitForConnection(KNXIpConnectionManager.java:264)
at org.openremote.controller.protocol.knx.KNXIpConnectionManager.getConnection(KNXIpConnectionManager.java:222)
at org.openremote.controller.protocol.knx.KNXIpConnectionManager$ConnectionTask.run(KNXIpConnectionManager.java:989)
at java.util.TimerThread.mainLoop(Timer.java:555)
at java.util.TimerThread.run(Timer.java:505)
INFO 2015-12-29 14:56:11,337 (KNX): Trying to create connection
INFO 2015-12-29 14:56:11,337 (KNX): Removing connection
INFO 2015-12-29 14:56:11,338 (KNX): KNX-IP socket listener IOException
java.net.SocketException: socket closed
at java.net.DualStackPlainDatagramSocketImpl.socketReceiveOrPeekData(Native Method)
at java.net.DualStackPlainDatagramSocketImpl.receive0(DualStackPlainDatagramSocketImpl.java:120)
at java.net.AbstractPlainDatagramSocketImpl.receive(AbstractPlainDatagramSocketImpl.java:144)
at java.net.DatagramSocket.receive(DatagramSocket.java:812)
at org.openremote.controller.protocol.port.DatagramSocketPort.receive(DatagramSocketPort.java:78)
at org.openremote.controller.protocol.knx.ip.IpProcessor$PhysicalBusListener.run(IpProcessor.java:82)
WARN 2015-12-29 14:56:11,342 (KNX): KNX-IP socket listener stopped
INFO 2015-12-29 14:56:11,346 (KNX): KNX Connection manager resolving local host IP addresses...
INFO 2015-12-29 14:56:11,409 (KNX): Skipping loopback interface: name:lo (Software Loopback Interface 1)
INFO 2015-12-29 14:56:11,409 (KNX): Skipping disabled NIC: name:net0 (Microsoft ISATAP Adapter #3)
INFO 2015-12-29 14:56:11,410 (KNX): Skipping disabled NIC: name:eth0 (VMware Virtual Ethernet Adapter for VMnet1)
INFO 2015-12-29 14:56:11,411 (KNX): Skipping disabled NIC: name:net1 (Microsoft ISATAP Adapter #2)
INFO 2015-12-29 14:56:11,412 (KNX): Skipping disabled NIC: name:eth1 (VMware Virtual Ethernet Adapter for VMnet8)
INFO 2015-12-29 14:56:11,412 (KNX): Skipping disabled NIC: name:ppp0 (WAN Miniport (PPPOE))
INFO 2015-12-29 14:56:11,413 (KNX): Skipping disabled NIC: name:net2 (WAN Miniport (PPTP))
INFO 2015-12-29 14:56:11,414 (KNX): Skipping disabled NIC: name:eth2 (WAN Miniport (IPv6))
INFO 2015-12-29 14:56:11,414 (KNX): Skipping disabled NIC: name:eth3 (WAN Miniport (IP))
INFO 2015-12-29 14:56:11,415 (KNX): Skipping disabled NIC: name:eth4 (Shrew Soft Virtual Adapter)
INFO 2015-12-29 14:56:11,416 (KNX): Skipping disabled NIC: name:eth5 (Microsoft Kerneldebugger-Netzwerkadapter)
INFO 2015-12-29 14:56:11,416 (KNX): Skipping disabled NIC: name:net3 (WAN Miniport (L2TP))
INFO 2015-12-29 14:56:11,417 (KNX): Skipping disabled NIC: name:net4 (WAN Miniport (SSTP))
INFO 2015-12-29 14:56:11,418 (KNX): Skipping disabled NIC: name:net5 (Microsoft ISATAP Adapter)
INFO 2015-12-29 14:56:11,418 (KNX): Skipping disabled NIC: name:net6 (WAN Miniport (IKEv2))
INFO 2015-12-29 14:56:11,420 (KNX): Found candidate NIC: name:eth6 (Realtek PCIe GBE Family Controller)
INFO 2015-12-29 14:56:11,420 (KNX): Added candidate IP address to set - /192.168.0.248
INFO 2015-12-29 14:56:11,421 (KNX): Skipping disabled NIC: name:net7 (Microsoft ISATAP Adapter #4)
INFO 2015-12-29 14:56:11,422 (KNX): Skipping disabled NIC: name:eth7 (WAN Miniport (Network Monitor))
INFO 2015-12-29 14:56:11,423 (KNX): Skipping disabled NIC: name:eth8 (Realtek PCIe GBE Family Controller-WFP Native MAC Layer LightWeight Filter-0000)
INFO 2015-12-29 14:56:11,423 (KNX): Skipping disabled NIC: name:eth9 (Realtek PCIe GBE Family Controller-Shrew Soft Lightweight Filter-0000)
INFO 2015-12-29 14:56:11,424 (KNX): Skipping disabled NIC: name:eth10 (Realtek PCIe GBE Family Controller-QoS Packet Scheduler-0000)
INFO 2015-12-29 14:56:11,425 (KNX): Skipping disabled NIC: name:eth11 (Realtek PCIe GBE Family Controller-WFP 802.3 MAC Layer LightWeight Filter-0000)
INFO 2015-12-29 14:56:11,425 (KNX): Skipping disabled NIC: name:eth12 (WAN Miniport (IP)-WFP Native MAC Layer LightWeight Filter-0000)
INFO 2015-12-29 14:56:11,426 (KNX): Skipping disabled NIC: name:eth13 (WAN Miniport (IP)-Shrew Soft Lightweight Filter-0000)
INFO 2015-12-29 14:56:11,427 (KNX): Skipping disabled NIC: name:eth14 (WAN Miniport (IP)-QoS Packet Scheduler-0000)
INFO 2015-12-29 14:56:11,428 (KNX): Skipping disabled NIC: name:eth15 (WAN Miniport (IPv6)-WFP Native MAC Layer LightWeight Filter-0000)
INFO 2015-12-29 14:56:11,428 (KNX): Skipping disabled NIC: name:eth16 (WAN Miniport (IPv6)-Shrew Soft Lightweight Filter-0000)
INFO 2015-12-29 14:56:11,429 (KNX): Skipping disabled NIC: name:eth17 (WAN Miniport (IPv6)-QoS Packet Scheduler-0000)
INFO 2015-12-29 14:56:11,430 (KNX): Skipping disabled NIC: name:eth18 (WAN Miniport (Network Monitor)-WFP Native MAC Layer LightWeight Filter-0000)
INFO 2015-12-29 14:56:11,430 (KNX): Skipping disabled NIC: name:eth19 (WAN Miniport (Network Monitor)-Shrew Soft Lightweight Filter-0000)
INFO 2015-12-29 14:56:11,431 (KNX): Skipping disabled NIC: name:eth20 (WAN Miniport (Network Monitor)-QoS Packet Scheduler-0000)
INFO 2015-12-29 14:56:11,433 (KNX): Skipping point-to-point interface: name:net8 (Teredo Tunneling Pseudo-Interface)

I used this openremote desiger files: http://www.file-upload.net/download-11163014/openremote.zip.html

Can you please explain me what i am doing wrong!

Best regards
Frank S.

Posted by bpmman at Dec 29, 2015 14:09

We should already use ip from config file.
Could you email me your modifications anyway, so i can take a look?
Thanks,
-Marcus

Posted by mredeker at Dec 29, 2015 21:05

Hi Marcus,

first of all thank you very much for the quick response.
I couldn't send you an email because your email is hidden but i upload

1. the hole OR controller folder (http://www.file-upload.net/download-11165373/OpenRemote-Controller-2.1.0.rar.html)
2. only the config.properties file (http://www.file-upload.net/download-11165386/config.properties.html)

thanks
Frank

Posted by bpmman at Dec 30, 2015 11:28

Looks OK to me. I don't know why it does not detect the KNX interface at 192.168.0.101

Posted by mredeker at Jan 02, 2016 21:31

Shit. That doesn't sounds good for me, but did you have any other idea? (e.g. Firewall, Windows 10...)

Posted by bpmman at Jan 02, 2016 22:40

Do you have something else connected to the interface at the same time the OR controller wants to connect?
Does the interface allow multiple simultanous connection? If not this could be an issue.
Some info was here: http://www.openremote.org/display/forums/Newbie+problem+on+start++-+Knx+ip+gateway+not+found

Posted by mredeker at Jan 02, 2016 23:09

Thx but I already read this thread. The Weinzierl 730 KNX gateway can handle up to 5 connections.

Posted by bpmman at Jan 03, 2016 03:30

Hello!

Now i have used openremote on a raspberry pi and there i works but on Windows 10 it still doesn't work.

Posted by bpmman at Jan 09, 2016 23:58
Document generated by Confluence on Jun 05, 2016 09:38