This page last changed on Apr 03, 2015 by ac3.

Hello,

New to Open Remote but very excited to be here. My system is Windows 7 Ultimate 64 bit. I have the 32 bit JDK Version 6 update 45 installed. I have the Aeon Z stick series 2. I have not learned any devices onto the z stick yet because I don't have any z wave devices yet (but I soon will). I was able to get the controller to start and my free design account to sync to the controller. I have been playing around just to get familiar with the designer and try to understand what possibilities I have with OR.

I am having 3 issues, not sure if I should break them up into different posts. Let me know if I should.

Issue 1)

I have noticed the following error message in the boot log:

ERROR main: Serial_Port_RXTX : Failed to configure the serial port [Name: 'COM3', Communication Layer: RXTX] because it is already in use
.
ERROR main: Serial_Port : Failed to open the serial port [COM port: COM3, Communication Layer: RXTX].

Issue 2)

I get the following error in the zwave log:

INFO 2015-04-02 20:48:23,887 (Z-Wave):

--------------------------------------------------------------------

OpenRemote Z-Wave protocol version : '2.0.0'

--------------------------------------------------------------------

INFO 2015-04-02 20:51:13,035 (Z-Wave): Serial_Port : Opening the serial port [COM port: com3, Communication Layer: RXTX]...
ERROR 2015-04-02 20:51:13,050 (Z-Wave): Serial_Port_RXTX : Failed to configure the serial port [Name: 'com3', Communication Layer: RXTX] because it does not exist.
ERROR 2015-04-02 20:51:13,050 (Z-Wave): Serial_Port : Failed to open the serial port [COM port: com3, Communication Layer: RXTX].

Issue 3)

It looks like I have a conflict with RXTX. However, I am not even sure if this is really a problem yet or not. I would like to get issues 1 & 2 sorted out first. There is some information I have seen on the forums but not specific to my setup (most stuff I found on this was for Linux and Pro Designer accounts)

WARNING: RXTX Version mismatch
Jar version = RXTX-2.2pre1
native lib Version = RXTX-2.1-7
Error 0x5 at /home/bob/foo/rxtx-devel/build/../src/termios.c(860): Access is denied.

Thanks for any help anyone can offer!

AC


ZWaveConfig.PNG (image/png)
Document generated by Confluence on Jun 05, 2016 09:34