This page last changed on Aug 28, 2013 by bradhnz.

I have successfully run open remote z wave on xp. I then moved the installation to my main pc running win7. The wave log are all populated and the aeon z stick recognised. However when I go to my android app it will not recognise the controller saying xml panel doesn't exist. I have tried a fresh installation.

One thing I notice is that if I change the paneling designer on one pc it will not shows my changes in designer on the main pc. Are these held in the cloud.

Thanks
Brad


Screenshot_2013-08-30-19-54-10.jpg (image/jpeg)
boot.log (application/octet-stream)
boot.log (application/octet-stream)
boot.log (application/octet-stream)
zwave.log (application/octet-stream)
boot.log (application/octet-stream)
dev.log (application/octet-stream)
boot.log (application/octet-stream)

The designs are stored in the cloud. You will need to resync each controller individually to load a new design on them.

Posted by juha at Aug 28, 2013 11:33

Thanks

I have done this and still no panel available.

Just for clarification, when you sync the controller does this upload the current design to the cloud or does it pull from the cloud and update your local directory.

Brad

Posted by bradhnz at Aug 29, 2013 00:26

It pulls from the cloud and updates the local directory on the machine where the controller is running.

Posted by mredeker at Aug 29, 2013 08:32

Is there a folder I can check to see if it has uploaded correctly

Posted by bradhnz at Aug 29, 2013 08:58

OpenRemote-controller-xxx/webapps/controller

There you should find the controller.xml, panel.xml and image files which you use in your design.

Posted by mredeker at Aug 29, 2013 09:03

Yes these are both there but I can still not access the panel from android app with the error cannot get panel identity list

Posted by bradhnz at Aug 29, 2013 09:51

Does your Android find your Win7 PC when discovering the controller?
When you select the Win7 controller it does not populate the list of available panels on Android?
Could you clear android app data cache and try again?

Posted by mredeker at Aug 29, 2013 10:03

Yes it does find, I have also tried to clear the cache

Posted by bradhnz at Aug 29, 2013 10:24

Do you see any erorrs in the controller log file?
Can you access the panel with the webconsole?

Posted by mredeker at Aug 29, 2013 10:54

yes webconsole access is fine. where do I find the controller log

thanks again for this help

Posted by bradhnz at Aug 30, 2013 08:16

The logs are under OpenRemote-Controller-xxx/logs/
If the webconsole works and the panel shows it looks like an issue with Android discovery Windows7.
Can you add the controller manually on Android?

Posted by mredeker at Aug 30, 2013 08:28

This is what I get on my tablet

Posted by bradhnz at Aug 30, 2013 08:53

What is: http://controller.openremote.org/android/controller ??
You can delete that.

Otherwise I am out of ideas at the moment.

Posted by mredeker at Aug 30, 2013 09:14

here is my boot log attached, does that helpboot.log

Posted by bradhnz at Aug 30, 2013 09:48

I see an error regarding HTTP protocol but nothing else.

Posted by mredeker at Aug 30, 2013 10:47

Brad,

Have you changed the port configuration of the controller yourself? The auto-discovery is currently advertizing port 18581 which is not the default port.

Posted by juha at Aug 30, 2013 12:26

Ok what should this be set to and where else should it match
Thanks

Posted by bradhnz at Aug 30, 2013 22:28

The new port number should be specified in the controller's config/server.xml file and in the designer controller configuration section.

These are described in detail here: Change Controller Default Port

Look for the 'configure alternative port' section.

So if you wish to use port 18581, make sure the port has been changed on both locations.

– Juha

Posted by juha at Aug 30, 2013 22:55

great that was it
tested with zwaveme and everything working, i now just get this error from my android

send request error, command not found

have attached log, panel set to node 3
zwave.log

getting closer
thanks

Posted by bradhnz at Aug 31, 2013 04:29

That log does not show why the command is not found.
Anything in the boot.log?

Posted by mredeker at Aug 31, 2013 19:58

boot.log

here you go

Posted by bradhnz at Sep 04, 2013 07:56

Node 3 is not known by the zwave controller.
Check the Z-Wave documentation: docs:Discover Controller Z\-Wave Devices

Posted by mredeker at Sep 04, 2013 08:37

Thanks, but my attached zwave log in previous post states node 3

Posted by bradhnz at Sep 04, 2013 08:49

Please turn on debug and look for these lines like described in t he documentation:

INFO (Z-Wave): Reader thread asked to start
INFO (Z-Wave): Writer thread asked to start
INFO (Z-Wave): Writer thread starting
DEBUG (Z-Wave): sending: 01 03 00 02 fe 
DEBUG (Z-Wave): received: 18 
DEBUG (Z-Wave): Received CAN, resend last frame
DEBUG (Z-Wave): sending: 06 
DEBUG (Z-Wave): sending: 01 03 00 02 fe 
DEBUG (Z-Wave): received: 06 
DEBUG (Z-Wave): received: 01 25 01 02 05 08 1d 79 01 00 00 00 00 00 00 00 00 ... 
DEBUG (Z-Wave): sending: 06 
DEBUG (Z-Wave): Node id: 1 discovered
DEBUG (Z-Wave): Node id: 3 discovered

As long as you don't see "Node id: 3 discovered" the device does not exist.

Posted by mredeker at Sep 04, 2013 09:05

I have done all these things but only see this in the zwave log file

DEBUG 2013-09-04 20:47:06,469 (Z-Wave): Z-Wave command: command = dim
DEBUG 2013-09-04 20:47:08,528 (Z-Wave): Building Z-Wave command
DEBUG 2013-09-04 20:47:08,528 (Z-Wave): Z-Wave command: nodeId = 3
DEBUG 2013-09-04 20:47:08,528 (Z-Wave): Z-Wave command: command = status
DEBUG 2013-09-04 20:47:08,544 (Z-Wave): Building Z-Wave command
DEBUG 2013-09-04 20:47:08,544 (Z-Wave): Z-Wave command: nodeId = 3
DEBUG 2013-09-04 20:47:08,544 (Z-Wave): Z-Wave command: command = dim
DEBUG 2013-09-04 20:47:10,587 (Z-Wave): Building Z-Wave command
DEBUG 2013-09-04 20:47:10,587 (Z-Wave): Z-Wave command: nodeId = 3
DEBUG 2013-09-04 20:47:10,587 (Z-Wave): Z-Wave command: command = status
DEBUG 2013-09-04 20:47:10,587 (Z-Wave): Building Z-Wave command
DEBUG 2013-09-04 20:47:10,587 (Z-Wave): Z-Wave command: nodeId = 3
DEBUG 2013-09-04 20:47:10,587 (Z-Wave): Z-Wave command: command = dim
DEBUG 2013-09-04 20:47:16,671 (Z-Wave): Building Z-Wave command
DEBUG 2013-09-04 20:47:16,671 (Z-Wave): Z-Wave command: nodeId = 3
DEBUG 2013-09-04 20:47:16,671 (Z-Wave): Z-Wave command: command = status
DEBUG 2013-09-04 20:47:16,671 (Z-Wave): Building Z-Wave command
DEBUG 2013-09-04 20:47:16,671 (Z-Wave): Z-Wave command: nodeId = 3
DEBUG 2013-09-04 20:47:16,671 (Z-Wave): Z-Wave command: command = dim
DEBUG 2013-09-04 20:47:56,451 (Z-Wave): Building Z-Wave command
DEBUG 2013-09-04 20:47:56,451 (Z-Wave): Z-Wave command: nodeId = 3
DEBUG 2013-09-04 20:47:56,451 (Z-Wave): Z-Wave command: command = on

Posted by bradhnz at Sep 04, 2013 09:49

As long as you don't get the "Node id: 3 discovered" this will not work.
Do you see any error in any of the log files?

Posted by mredeker at Sep 04, 2013 10:12

Thanks, which other log files should I look in

Posted by bradhnz at Sep 04, 2013 10:15

dev.log or boot.log.
Maybe delete those and restart the controller so we have chance to see what is in there.

Posted by mredeker at Sep 04, 2013 10:25

please find attached after restart
dev.log
boot.log

Posted by bradhnz at Sep 04, 2013 10:37

I cannot see the zave discovery process.
Can you attache the complete zwave.log after deleting it and restart.

Posted by mredeker at Sep 04, 2013 10:40

The debug in my previous post is all I get

Posted by bradhnz at Sep 04, 2013 10:57

Sorry, but I am out of ideas.

Posted by mredeker at Sep 04, 2013 11:17

Is device 3 your only device? It may just be broken. What is the brand and the version?

tested with zwaveme and everything working

I assume this testing was on Z-Cloud ? If so is it still functioning on that platform?

Posted by pz1 at Sep 04, 2013 11:37

Brad,

There should be zwave logs in /logs/zwave/zwave.log and /logs/zwave/zwave-debug.log – are they also not showing any additional information about the Z-wave nodes?

Posted by juha at Sep 04, 2013 12:07

No they are just showing this in both logs, zwave.log and zwave-debug.log.
Tested and working on zwave me and also works from my xp laptop, just not this desktop machine with win7 installed.

Thanks for all your help on this guys

DEBUG 2013-09-04 20:47:06,469 (Z-Wave): Z-Wave command: command = dim
DEBUG 2013-09-04 20:47:08,528 (Z-Wave): Building Z-Wave command
DEBUG 2013-09-04 20:47:08,528 (Z-Wave): Z-Wave command: nodeId = 3
DEBUG 2013-09-04 20:47:08,528 (Z-Wave): Z-Wave command: command = status
DEBUG 2013-09-04 20:47:08,544 (Z-Wave): Building Z-Wave command
DEBUG 2013-09-04 20:47:08,544 (Z-Wave): Z-Wave command: nodeId = 3
DEBUG 2013-09-04 20:47:08,544 (Z-Wave): Z-Wave command: command = dim
DEBUG 2013-09-04 20:47:10,587 (Z-Wave): Building Z-Wave command
DEBUG 2013-09-04 20:47:10,587 (Z-Wave): Z-Wave command: nodeId = 3
DEBUG 2013-09-04 20:47:10,587 (Z-Wave): Z-Wave command: command = status
DEBUG 2013-09-04 20:47:10,587 (Z-Wave): Building Z-Wave command
DEBUG 2013-09-04 20:47:10,587 (Z-Wave): Z-Wave command: nodeId = 3
DEBUG 2013-09-04 20:47:10,587 (Z-Wave): Z-Wave command: command = dim
DEBUG 2013-09-04 20:47:16,671 (Z-Wave): Building Z-Wave command
DEBUG 2013-09-04 20:47:16,671 (Z-Wave): Z-Wave command: nodeId = 3
DEBUG 2013-09-04 20:47:16,671 (Z-Wave): Z-Wave command: command = status
DEBUG 2013-09-04 20:47:16,671 (Z-Wave): Building Z-Wave command
DEBUG 2013-09-04 20:47:16,671 (Z-Wave): Z-Wave command: nodeId = 3
DEBUG 2013-09-04 20:47:16,671 (Z-Wave): Z-Wave command: command = dim
DEBUG 2013-09-04 20:47:56,451 (Z-Wave): Building Z-Wave command
DEBUG 2013-09-04 20:47:56,451 (Z-Wave): Z-Wave command: nodeId = 3
DEBUG 2013-09-04 20:47:56,451 (Z-Wave): Z-Wave command: command = on

Posted by bradhnz at Sep 04, 2013 21:09

is this java version ok

C:\>java -version
java version "1.6.0_45"
Java(TM) SE Runtime Environment (build 1.6.0_45-b06)
Java HotSpot(TM) 64-Bit Server VM (build 20.45-b01, mixed mode)

Posted by bradhnz at Sep 05, 2013 09:06

I have also tried copying my working openremote version from xp onto this pc and still no luck

Posted by bradhnz at Sep 05, 2013 10:04

Did you look into the threads dealing with windows 7?
Google: site:openremote.org win7

Posted by pz1 at Sep 05, 2013 10:27

Yes everything runs fine until command error from tablet

Posted by bradhnz at Sep 05, 2013 10:54

Is this 64bit windows7?
Then it could be a problem with the RXTX native lib. But that should show up in the logfile.

Posted by mredeker at Sep 05, 2013 12:48

Which Android app are you using? From Google playstore, or the alpha/beta version that lives somewhere in the forum threads?
I ran version 2.1.0 Beta on a noname Android 4.03 from an OR Controller (Pro 1.0.7) on my Win7 portable

Posted by pz1 at Sep 05, 2013 13:19

Brad,

As Marcus said, if your Win7 machine is 64-bit instead of the 32-bit which is more common for WinXP then the DLL libraries for serial connection must be updated. You can find the discussion on Windows 64 bit DLLs in this thread: Zwave rxtxSerial dll Can't load IA 32bit

Posted by juha at Sep 06, 2013 13:16

Thanks, thats it working now, thanks for all your help guys.
This may be a good thing to put in the installation instructions.

Posted by bradhnz at Sep 06, 2013 23:51
Document generated by Confluence on Jun 05, 2016 09:42